Search: lug wrench   >  

Kelly, the Replacement Square, Direct Weld Jack Inner Tube with Spring-Return Drop Leg #TJD-12000SP-FIP measures 19" tall.

For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since trailer…

Thanks for the photo of your camper. Looks like a nice area. I was able to find the owner's manual for the Aliner trailer. The tires that came on the trailer originally are 4.80 x 12 and the wheels have a 5 on 4-1/2 bolt configuration. The tire…

For a high quality trailer and wheel that has an ST175/80R13 mounted to it is the part #AM31998 which has a Load Range D and an aluminum wheel. It has an automotive tread pattern and a higher speed rating at 81 mph. Our trailer wheel and tires that…

For 3,500 lb axles you will use 10 inch assemblies. My recommendation is the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs #AKEBRK-35-SA for each axle. These assemblies will work well for your…

Really the only way to tell if you have manual or self-adjusting brakes is to remove the hub and take a look inside. If you can see a cable running at an angle (see included photo), then you have self adjusting brakes like the Electric Trailer Brake…

I recommend starting with the Roadmaster Rear Anti-Sway Bar, #RM-1139-147. This will reduce side-to-side movement for a noticeable improvement in your vehicle's stability and reduced body roll. For the front, I recommend the Timbren Front…

It looks like the Aliner Scout has a dry weight of around 1350-lbs and a tongue weight of around 135-lbs when unloaded. Since you need a side-wind jack, I recommend using the etrailer.com Round, A-Frame Trailer Jack #TJA-5000S-B which will easily…

According to our resident tire expert, the 215/60-8 is the modern equivalent of the 18.5 x 8.5-8 tire. I have included a link to a tire sizing FAQ for you that compares different tire sizes. If you just need the tire, we have some options. First is…

Certain types of grease are compatible with each other but since you do not know what type is in your trailer now we recommend that you remove the existing grease from your trailer wheel bearings before refilling them. Even if you know what type of…

I do have a few easier options for you to determine the weight capacity of an axle other than using the bolt pattern or the number of lug nuts. The problem with using the bolt pattern to tell the axle capacity is that an axle may have the a bolt…

We do have the Replacement Inner Tube with Drop Leg, Foot, and Pull Pin for Curt Heavy Duty Direct Weld Square Jack #C28957. This is a 3-1/2" x 3-1/2" square inner tube that is designed to replace the inner tube on the Curt 28512 jack. We…