Snap-In Plug for Lionshead Trailer Wheel Center Caps - Chrome
(266 reviews)
Price: $13.51
In Stock
Snap-In Plug for Lionshead Trailer Wheel Center Caps - Chrome
Item # LHSI60C
Our Price: $13.51
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (266)
- Q & A (0)
- Videos (2)
- Photos
Lionshead Accessories and Parts - LHSI60C
- Boat Trailer Wheels
- Trailer Tires and Wheels
- Wheel Trim
- Center Cap Plug
- Fits 1-15/16 Inch Holes
- Lionshead
- Chrome
Plug for your Lionshead trailer wheel center cap (sold separately) snaps right into place. Removable plug provides easy access for hub maintenance on E-Z Lube axles.
Features:
- Snap-in plug fits Lionshead trailer wheel center caps LHCS102, LHCS108, and LHCS109 (sold separately)
- Designed to snap directly into the top of center cap
- Removable plug provides easy access for hub maintenance on E-Z Lube axles
- Plastic construction
- Chrome finish
Specs:
- Wheel size: 15" and 16" diameter with 6-hole bolt patterns
- Pilot diameter: 4.25" - 4.27"
- Outer diameter: 2-1/4"
- Diameter of tabs on snap-in plug: 2"
SI60C Lionshead Snap-In Cover for Trailer Wheel Center Caps - Chrome
SUSIC-60-CHR
Video of Snap-In Plug for Lionshead Trailer Wheel Center Caps - Chrome
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lionshead Trailer Wheel Center Cap Review
Today we're going to be taking a look at the Lionshead center caps for the trailer wheel. Now these caps are designed to improve the appearance of your trailer, and also keep the end of your hubs clean, so they're easier to maintain. Now, these are designed in three different sizes. These small one is LHCS102, that's going to be for the pilot hole, or the rim opening hole of 3.19 inches. The middle size, LHCS108, that works for the 4-1/4 inch pilot hole rims. And then for the larger size, we're going to have part number LHCS109, this is for the 4.88 up to 4.9 inch pilot holes. Now for the small center cap to fit inside, all of them are going to use the same size.
That part number is LHSI60C. Now, each of our center caps are designed to slide into the respective rim size, with a small flange around the back side that keeps it from passing through. Now, there are also four little raised edges here, as we tighten our rim down, those get compressed slightly, and that will keep this from moving around, rattling around, or rotating. You'll see, without the center cap installed, still going to give us a nice, clean look, and easy access into our easy lube hubs, or even barring buddies. The center cap is just going to be a pressure fit. There's a small notch in it, that you'll want to orient so you can find it.
Pop that on. It's going to give us a more clean look, kind of finishes that up. It's going to keep dirt and debris and stuff like that from getting in our cap. But then, just with a small, flat blade screw driver, we go to that little notch, you can see we can pop them off fairly easily there to gain access. Now, the center cap itself, and the cover are available as a kit, if you want to get them at the same time. You'll just use the part number for the cap size you need, which will be LHCS102, 108, or 109.
Then you'll put a dash behind that, and add SI60C, that will give you the cap and cover that will work for your rim. Then, not only is that stainless steel finish going to give us a nice look, but this is also a very corrosion resistant material, so we shouldn't have to worry about any corrosion. And we'll be able to clean them up nicely each time. And that will complete our look at the Lionshead line of center caps. Available with cover.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Snap-In Plug for Lionshead Trailer Wheel Center Caps - Chrome - LHSI60C
Average Customer Rating: 4.7 out of 5 stars (266 Customer Reviews)
Plug for your Lionshead trailer wheel center cap (sold separately) snaps right into place. Removable plug provides easy access for hub maintenance on E-Z Lube axles.by: S. B.08/07/2023
The part fit the size it’s supposed to ( for a Rockwood Roo 183 hybrid camper) easy order, easy delivery, easy install!
by: 09/22/2023
First it was a exact match of existing Snap-In Plugs on my trailer. However not exact. On my first trip down 26miles of rough dirt road I lost two of the four caps. I pull the remaining two but before the next trip I put contact cement on the points of contact with the wheel hub let it dry for a couple days before installing them. Next trip down the dirt road they stayed on. The contact cement appears to provide the added friction to keep the caps on. I hope this helps.
by: Steve08/13/2023
I got 2 of the center caps for the Lionhead wheels. These are incredibly cheap, plastic and are not removable. Put them on and do not remove them for easy access to grease the hubs. Once you take them off, the tabs break and it will never go back on. Super cheap.
by: Ryan04/27/2023
Lost a cap and this was exact same model, good quality product. Excellent services with fast shipping.
by: Mark 07/20/2023
Direct replacement for the one I had. Simple device. Works. Purchase was quick and easy with excellent service from eTrailer
by: Keith 08/09/2023
Way overpriced for a little plastic trim part. I had to have it you were the only authorized dealer.factory fit wheel looks new again
by: Mike08/01/2023
Plastic. Tight fit they will break eventually for something that cost12 dollars I don't see it but you can send back but etrailer makes it complicated that's there down fall they will never get no more of my business but I am just a nobody
by: Pete 07/27/2023
They work great. Look just like the original ones that came with the trailer.
by: Joe 06/18/2023
Everything fit perfectly, but the price was pretty high for a piece of plastic. E Trailer is great, everyone charges similarly...
by: Bryan 07/27/2023
Perfect replacement.
by: Dean 06/26/2023
Perfect fit!
I should have ordered from etrailer first time.
by: Arthur06/20/2022
was a exact match to what i had
by: John 04/19/2023
Website description allowed me to order the correct center cap. It arrived on time. The cap fits like the original.
by: Louis08/25/2023
Perfect fit perfect match what could be better.
by: Patrick 04/24/2023
I was concerned the part is plastic but it nonetheless is a quality part and looks great on the wheel. Delivery was very fast and without issue. Happy camper!
by: Andy M07/29/2018
Cap was used to replace a missing cap from a Forest River TT with 15” wheels. Center cap fits and looks perfect.
by: Scott07/25/2023
The product is nice, however, they do not fit very tight on my wheels.
by: Thomas D09/22/2023
Easy to find what I needed. Delivery was faster than expected.
by: David07/19/2023
Nice product, looks great! But unfortunately it was a little small for my hub. Nothing wrong with the product, I ordered it off a guess!
by: Bruce 04/08/2023
These guys are great. I ordered a cheap 10 dollar part and the way I was treated, you would think I ordered a whole new trailer frame. Nice job.
by: John 08/04/2023
It's what I ordered.
by: Kathryn06/20/2023
Ordering from your website was easy and communication about this product's availability was appreciated. We needed this for our 2012 RPod 177 and it fits perfectly. Thank you.
by: Mike 07/05/2023
Catalog description was accurate and allowed matching of existing caps. Order was simple. Product delivered in reasonable time.
by: Wayne 09/11/2023
Exellent! It was a perfect fit.
by: Bruce 07/13/2023
This was my 3rd try you folks got it right the first time I will come here for my parts from now on
25
266
Show More Reviews
See what our Experts say about this Lionshead Accessories and Parts
- Determining if Lionshead Snap-In Plug # LHSI60C Will Fit Unknown Brand Center Cap The Snap-In Plug # LHSI60C that you referenced is indeed designed to fit certain Lionshead Center Caps but it will still work as a replacement on other brand caps as long as the dimensions match. The best way to determine if this will fit your existing caps is to simply compare the dimensions and features for this unit to your current plug. This center plug features an overall diameter of 2.17 inches and from the outside of one tab to the outside of the one directly accross from it there...
view full answer...
- Determining The Correct Replacement Wheel Center Cap for a 2021 Venture Sonic Lite TTI checked to see if we have anything that matches what you're looking for, however I was not able to find anything that matches. The closest I was able to find to what you're looking for is the Snap-In Plug for Lionshead Trailer Wheel Center Caps # LHSI60C which has an O.D of 2.25" ( 2-1/4"). What would really help determine if we have something that'll work for you is to know what wheel you're trying to replace the center cap for. Most of these are interchangeable relatively speaking,...
view full answer... - Replacement For Wheel Center Cap SUSUC-60-BLK On Grand Design Solitude 345GK We will only have the Chrome # LHSI60C replacement version of the SUSUC-60-BLK. We do have the Americana Center Cap # AM90081 in black. This is slightly smaller but may still fit your Grand Design Solitude 345GK. These caps fit a hole size of 1-7/8" versus the 1-15/16" the Chrome # LHSI60C center cap is designed to fit.
view full answer... - Solution for Black Snap-In Plug for Lionshead Trailer Wheel Center CapsThe Snap-In Plug # LHSI60C is the only available plug for a Lionshead wheel center caps like the # LHCS109. Unfortunately, that means they only come in chrome. However, if you really want black it could easily be painted. Make sure if you choose to paint it that you don't cover the notch that allows you to remove the plug from the wheel center cap.
view full answer... - Replacement Trailer Hub Center Caps For a 2011 Forest River Flagstaff T12RB CamperIt sounds like you need the Snap-In Plug for Lionshead Trailer Wheel Center Caps # LHSI60C. This has an outside diameter or 2-1/4" and is designed to fit a hole which is 1-15/16" in diameter on the center cap. While this center cap is chrome you can paint it black like you are looking for. The only black center cap we have is the Americana # AM90081. This cap has only has an outside diameter of 2-1/16" and is designed to fit a hole 1-7/8" in diameter.
view full answer... - Diameter of Access Hole in Lion's Head LHCS102 Trailer Wheel Center Cap With the plug removed, the hole in the end of the Lion's Head # LHCS102 center cap measures 2 inches in diameter as shown in the provided photo. It's possible that your bearing buddy might be compatible, but the opening in the center cap is designed to allow access to the grease zerks of E-Z lube spindles.
view full answer...
- Recommended Wheel Center Cap For TruckFor the 4.25 inch pilot hole, we have the Trailer Wheel Center Cap, Chrome, 4.25" Pilot Size # 425EZ. This is the closest option we have for your chrome caps of that size. We don't have just plugs in that size.
view full answer... - Center Cap Plug for Lionshead Wheel Center Cap 2 inch DiameterThe correct center cap plug you need is the part # LHSI60C which fits the 2 inch hole your current center cap has.
view full answer... - Replacement Wheel Center Cap Option For A 2018 Keystone Montana With A Kaper II A-C-490TT Center CapThanks for all the information! I was able to check out your Kaper II A-C-490TT that you're needing a replacement center cap plug for, and the closest center cap plug I was able to find is the Trailer Wheel Center Cap Plug # CCP-60C, which measures 2-3/16". Instead, I recommend replacing your entire wheel center caps with the: -Lionshead Trailer Wheel Center Cap w/ Snap-In Plug # LHCS109-SI60C. This new center cap # LHSI60C has a more standard plug outside diameter of 2", and will work...
view full answer... - Replacement Wheel Center Cap For 4.9" Wheel Pilot Hole DiameterI recommend replacing your wheel center caps with the Lionshead Trailer Wheel Center Cap w/ Snap-In Plug # LHCS109-SI60C as the largest replacement plug I can find is the Plug # CCP-60C which only has an outside diameter of 2-3/16". The new Lionshead cap uses the more common Plug # LHSI60C which has an outer diameter of 2" and we have several of available.
view full answer... - Replacement Center Cap Plug For Jayco Eagle Travel Trailer With 15", 6 Lug WheelsWhile I am unable to find a removable plug which matches your dimensions you may be able to replace the entire assembly with the Stainless Steel Cap and Plug # LHCS108-SI60C. This cap fits a wheel with a pilot hole of 4-1/4" which is the common size found on 6 lug wheels. We do have the Replacement Plug # LHSI60C which fits this cap. This cap fits a 2" hole with a outer diameter of 2-1/4".
view full answer... - Replacement Trailer Wheel Center Cap Plug for Aluma Trailer WheelsThanks for the photo. It's hard to tell the exact outer diameter of the cap but I believe we do have options for you which I have attached below. Trailer Wheel Center Cap Plug - Chrome part # AM90082 (2-1/16" Outer Diameter) Trailer Wheel Center Cap Plug - Chrome part # CCP-60C (2-3/16" Outer Diameter) Trailer Wheel Center Cap Plug - Chrome part # LHSI60C (2" Outer Diameter) Trailer Wheel Center Cap Plug - Black part # AM90081 (2-1/16" Outer Diameter) If none of these will work for you...
view full answer...
- Replacement Snap In Plug for Lions Head LHCS102 Center CapIt will not. The Lion's Head Center Cap, part # LHCS102-SI60C requires a 1-15/16 inch hole. The Americana # AM90081 plug fits a 1-7/8 inch hole. The correct plug is part # LHSI60C
view full answer... - Replacement Wheel Center Cap and Plug For a 2009 Quicksilver Livin-Lite 5.0 Tent TrailerIt sounds like you are looking for a snap in plug like the # LHSI60C which fits on a Wheel Center Cap # LHCS102-SI60C. Unfortunately I have no way to see exactly what parts were installed by the manufacturer for your 2009 Quicksilver Livin-Lite 5.0 Tent Trailer. Instead I can tell you the plug fits a 2" hole while the center cap fits a wheel with 5 lugs and a 3.19" pilot diameter. If this is different than the sizes you have or you are looking for something different please let me know.
view full answer... - Are Replacement Plugs Available for Lionshead # LHCS102-SI60C Trailer Wheel Center CapsThe removable plug of the # LHCS102-SI60C is plastic. A replacement is indeed available as part # LHSI60C. The replacement plug is plastic as well.
view full answer... - 3 plug in capSnap-In Plug for Lionshead Trailer Wheel Center Caps # LHSI60C measures 2.17 inches in overall diameter and from the outside of one tab to the outside of the opposite tab is 1.92 inches. I have included a picture showing this. This cap was designed for Lionshead trailer wheel center caps # LHCS102, # LHCS108, and # LHCS109. It looks like all the caps we have are this same 60C size.
view full answer...
- What Cap Fits the Loadstar ST205/75R14 Trailer Tire # LH84VR?I have a cap solution for you. Unfortunately, the Americana Trailer Wheel Center Cap w/ Plug - Chrome Plated # AM90195 will not fit the Castle Rock ST205/75R14 Radial Trailer Tire with 14" Aluminum Wheel # LH84VR because the Americana cap is designed to fit a 3.33" pilot diameter. The wheel has a 3.19" pilot diameter. With that being said, a great alternative for a 5-bolt 3.19" pilot diameter wheel is the Lionshead Trailer Wheel Center Cap - 3.19" Pilot # LHCS102 along with the Snap-In...
view full answer... - Availability of a Wheel Center Cap For Wheel with 3" Pilot Hole & Dexter EZ Lube Grease Zerk FittingThe wheel center caps we have jump from a 2.84" # AM90113 to a 3.19" # LHCS102-SI60C pilot hub bore. I recommend verifying the hub bore with a Digital Caliper # PTW80157 to see which is going to fit your wheel. If it is the 2.84" center cap it does not have a access hole for the EZ Lube grease zerk. But you can drill a hole in the end of the cap to add the Plug # LHSI60C and be able to easily access the grease zerk.
view full answer... - Replacement Lionshead Snap-on Plug for Wheel Center CapsWe do have a snap in plug for Lionshead trailer wheel center caps. The Snap-In Plug for Lionshead Trailer Wheel Center Caps - Chrome # LHSI60C will fit the following three models. # LHCS102, # LHCS108, # LHCS109. If you have one of these models then this option will work. Looking at your picture it seems like it will likely be the # LHSI60C, since that is the chrome option and it also appears that your current plug says "60C" on the inside. It is hard to make out in the picture but if...
view full answer...
- Does Pilot Hole Size Have to Match to Use Lionshead Trailer WheelThe Aluminum Modular Trailer Wheel - 16" x 7" Rim - 8 on 6-1/2 # LHJM513 has a 4.88" pilot diameter and will work for your horse trailer. Ther pilot diameter does not have to match your old wheel because this wheel fits over the lugs of your hub, and not the pilot hole, so you just need the correct size lug nuts to match your hub. This wheel is compatible with the Lionshead Trailer Wheel Lug Nut - 9/16"-18 # LHLR110. For a center cap you can use the Lionshead Trailer Wheel Center Cap...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Jacob T
Video by:
Kathleen M
Written by:
Mary K
Updated by:
Wilson B
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Arthur
6/21/2023
Great