4-Way Flat Wiring Harness For Connecting Trailer Lights To a 2013 Toyota Highlander Limited

Question

Question:

Can you send me the part number and the installation video for a trailer light kit for a 2013 Toyota Highlander limited. I don’t think I have a tow package.

asked by: Mike M

0

Expert Reply:

You are going to want the Curt T-Connector Vehicle Wiring Harness # C56217 which will give you a 4-way flat trailer light connector. I have linked an installation video for this near the bottom of the page.

expert reply by: Bud M

0

Answer 1

Hey Travis. The trailer wiring for the 2013 Toyota Highlander Hybrid is the same as the standard Highlander. The difference in which harness to choose will be impacted by whether or not you have the tow package. The T-One Vehicle Wiring Harness item…

view full answer...

Answer 2

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 3

Depending on if your 2014 Toyota Highlander has the tow package or not will dictate where the 4-way flat plug harness will connects on your vehicle. If you have the tow package, you will use Curt #56042. The plug for this harness is located behind…

view full answer...

Answer 4

For trailer wiring, there is not a difference between the hybrid and non-hybrid model for your 2018 Highlander. The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118449 is the correct fit for all styles of Highlander including the…

view full answer...

Answer 5

As long as your 2013 Toyota Highlander came with the factory tow package you can use the Curt wiring harness #56042. Models without the factory tow package would need to use #118449 or #C56217.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

4-Way Flat Wiring Harness For Connecting Trailer Lights To a 2013 Toyota Highlander Limited

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching