Recommended Replacement Winch Strap for a 2" Hand Winch

Question

Question:

I see your replacement straps are listed as 2” wide. The one that I’m replacing is 1 3/4” and the winch measures just shy of 2”. Is your measurement of 2” exact on your strap?

asked by: Hal D

0

Expert Reply:

The Hand Winch Strap with Safety Hook # DL24239 is not exactly 2" wide it's actually 1 7/8". Since the housing on your winch where the strap would go is 2" wide this strap will still work.

Also, this strap measures 15' long and has a breaking strength of 4,000lbs.

expert reply by: Bryce D

0

Hand Winch Width
(click to enlarge)

Answer 1

Hi Blake! You are going to want the Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #118270. This includes the fuses and relays needed to activate the tow package as your customer's 2014 Buick Enclave…

view full answer...

Answer 2

There are certain federal requirements for the type of lights and the placement of the lights on trailers and it is different for different types of trailers. For a small flat bed trailer, enclosed trailer, or travel trailer, at the front on both…

view full answer...

Answer 3

The bottom plate for the Dutton-Lainson Hand Winch #DL14627 is 4-3/4" wide x 5-1/2" long, while the bottom plate of the #DL14725 is slightly larger at 4-3/4" wide x 6-5/8" long. The diameter of the spools are exactly the same at…

view full answer...

Answer 4

The Dutton-Lainson DL2000 is indeed different as it is an earlier model of the DL2000A; I checked with Dutton-Lainson and they do not offer replacement parts for the older DL2000, and said that parts are not interchangeable between models. So while I…

view full answer...

Answer 5

It can definitely be a very confusing subject when trying to determine the correct size winch and strap for your boat. The important thing to remember is that you are not lifting the entire weight of the boat but rather pulling it across the bunk…

view full answer...

Answer 6

I spoke with my contact at Dutton Lainson and the max length (and recommended length) strap to use with the Dutton-Lainson Worm Gear Hand Winch #DL11004 is 20 feet like the #DL24242.

view full answer...

Answer 7

Hello Matt, thanks for reaching out. There are different models of the Dexter A-60 actuator. All will work with a tandem axle setup, but they make them for drum and disc brakes, so it depends which model you have. For example, the Dexter A-60 part…

view full answer...

Answer 8

Hi Kurt, I reached out to Optronics to see what kind of hardware is included with the Optronics LED Clearance or Side Marker Light #MCL95AB, but they unfortunately could not tell me. I took one apart in our warehouse and the bolt looks to be just a…

view full answer...

Answer 9

Hey Joseph, yes you can use just one ball on the platform of the TowSmart Adjustable Tri-Ball Mount #TS74VR at a time to help maximize ground clearance like you asked about. Do you have a have a low ground clearance vehicle?

view full answer...

Answer 10

Hey Darryn, the etrailer winch part #e75VV that you referenced has a capacity of 1,500 lb which isn't quite high enough unless you have roller bunks. For wood bunks with a normal winching distance the ratio of winch capacity to boat weight is 2…

view full answer...

Recommended Replacement Winch Strap for a 2" Hand Winch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching