Dutton-Lainson Hand Winch Strap Review

Customers compare DL24242 to these similar products

Replacement Winch Handle for Dutton Lainson Winch - 6"

(100)

$25.58

Dutton-Lainson Drill Drive Socket Adapter for DLB Series Winches

(39)

$22.99

Hand Winch Cable with Safety Hook 7/32" Diameter x 25' Long - 2,500 lbs.

(14)

$28.79

Hand Winch Cable with Safety Hook 7/32" Diameter x 50' Long - 2,500 lbs.

(12)

$51.40

Hex Shaft for Dutton-Lainson Worm Gear Winches

(15)

$11.14

BoatBuckle Boat Winch Strap with Hook and Safety Latch - Loop End - 2" x 20' - 1,333 lbs

(145)

$16.94

Hand Winch Cable with Safety Hook 1/4" Diameter x 25' Long - 1,400 lbs.

(24)

$40.36

Replacement Strap w/ Hook and Safety Latch for Dutton-Lainson Winch - 25' x 3" - 3,700 lbs

(4)

$55.84

Winch Strap with Hook - 2" x 15' - 2,600 lbs

(17)

$25.43

BoatBuckle Winch Strap with Hook and Safety Latch - Loop End - 2" x 15' - 1,333 lbs - Qty 1

(28)

$19.25

Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs

(27)

$63.72

Fulton Heavy-Duty Winch Strap with Hook - 20' x 3" - 4,000 lbs

(25)

$39.16

BoatBuckle PWC Winch Strap with Hook and Soft Tie - Loop End - 2" x 15' - 3,500 lbs

(73)

$16.69

Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs.

(48)

$22.69

BoatBuckle Boat Winch Strap with Hook and Safety Latch - Loop End - 2" x 25' - 2,667 lbs

(29)

$35.95

Heavy Duty Winch Strap, 15' x 2"

(26)

$33.66

Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.

(80)

$25.41

Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 2,600 lbs.

(22)

$27.82

BoatBuckle Boat Winch Strap with Latch-Lok Hook - Loop End - 2" x 20' - 4,000 lbs

(25)

$38.26

Dutton-Lainson Hand Winch Strap

(32)

$49.03

Products Featured in this Video

Review of a Hand Winch Strap from Dutton-Lainson

Today on this boat trailer we are going to install part number DL24242 from Dutton-Lainson, this is their 2 inch wide by 20 foot long winch strap and this is rated to 4,000 pounds. The first thing we need to do is remove the old strap. You can see at the very end there is a bolt that got bent up so we are going to have to remove that. We are going to reinstall the strap and go through it and install the nut. The nut stays on the gear side. When you install the bolt keep it as close to the center as possible and just tighten it down to where it meets, you do not have to really crush it or anything. Then you can just wind up your strap. There you have it for part number DL24242.

Info for this part was:

Video Edited:

Zack K

Video Edited:

Jacob T

Installed by:

Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.