Recommended Trailer Hitch for 2024 Toyota RAV4 Adventure

Question

Question:

Can you please recommend a hitch for my 2024 RAV4 Adventure? I need one that fits the Adventure model. Thank you.

asked by: Landon

0

Expert Reply:

For your 2024 Toyota RAV4 I recommend the etrailer Trailer Hitch Receiver # e23ZR. This fits all models of the RAV4, including the Adventure. This Class III hitch has a bolt-on installation and max gross trailer weight of 4,000 lbs. It also comes with a matte black finish for a rugged look and a limited lifetime warranty.

If you plan on towing you will also need wiring. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56434 will plug into the connection points in your rear cargo area. Once installed, you will have a 4-way to power your trailer's signal lights.

For a ball mount, check out the etrailer Ball Mount Kit # 989900. This kit has two ball mounts, one with a 3/4" rise or 2" drop and the other with a 2-3/4" rise or 4" drop. It also comes with a 1-7/8" and 2" ball, as well as a ball mount bag to store everything in.

I have attached some installation videos below for your reference.

expert reply by: Robin H

0

Answer 1

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 2

Hello Heidi, thanks for reaching out. Yes, the Curt Class 3 Hitch #C77MJ will indeed fit the 2024 Toyota Rav4 Adventure Trim. I double checked with Curt and they confirm it to fit all models of the 2024 Rav4 so that included the Adventure model. What…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Recommended Trailer Hitch for 2024 Toyota RAV4 Adventure

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching