bing tracking image
Q & A Icon

Recommended Brake Controller Wiring Harness For 2013 Toyota Tundra  

Question:

Will this fit a 2013 Toyota Tundra Double Cab?

0

Expert Reply:

If your 2013 Toyota Tundra has the factory 7-way installed, the Curt Custom Wiring Adapter, part # C51362 will be what you need to connect the Curt Discovery Trailer Brake Controller, part # C84VV.

If you have a 4-way connector installed on your Tundra, part # C51515 is what you need. This harness is used on a vehicle that does not have a factory tow package or on one that has a brake control harness but is not equipped with a plug-in port. If your vehicle doesn't have a factory tow package, you'll have to hardwire the pigtail end of the adapter into your vehicle's wiring.

If you are planning on towing quite a lot and for a better towing experience, I recommend the Curt TriFlex Trailer Brake Controller, part # C24VV. This is a proportional brake controller that works with electric or electric over hydraulic brakes on your trailer. This controller will activate the brakes on your trailer in proportion to the braking action of your vehicle. Proportional brake controllers are easier on your brakes than the time-delayed controllers.

If you have the factory 7-way on your truck then the Curt Custom Wiring Adapter for Trailer Brake Controllers, part # C51362 is the adapter you need.

If you do not have a 4-way or 7-way connector at the rear of your Tundra, I recommend the Universal Installation Kit for Trailer Brake Controller, part # ETBC7.

expert reply by:
0
Jeffrey L

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>