What Door Switches Are Needed For The Kwikee Electric RV Steps Control Module Lippert # 776367

Question

Question:

Can you tell me which door switch is correct for this Kwikee Electric RV Steps Lippert # 776367

asked by: Henry W

0

Expert Reply:

The Replacement Control Module 776367 # LC34AF does require a normally open switch. We have several of these to choose from depending on how you can install them on your door.

Rocker Switch with Door Sensor # LC369311
Magnetic Door Sensor # LC378054
Magnetic Door Sensor # LC375385
Magnetic Door Sensor # LC369299

expert reply by: Bud M

0

Answer 1

Hey Bradley, thanks for reaching out. We do have a replacement for the Kwikee step controller 776367. Here is the exact part you will need: - Replacement Control Module for Kwikee Electric RV Steps #LC34AF This is a direct replacement for the 776367…

view full answer...

Answer 2

Hey Dean, Based off of your OEM part number the correct replacement control module for your steps is going to be the #LC34AF. These control modules are specific to certain model and SKU steps so it is important to get the exact one for your set of…

view full answer...

Answer 3

Hey Bob, thanks for your order of the 42 Series Replacement Kwikee Steps #LC372779! The correct switch kit for steps is found as part #LC369311 and comes with the door sensor as well as a rocker switch for manual operation.

view full answer...

Answer 4

We have the right control module for you, but the part you mentioned won't work as it's for different Series steps. Since your tag says you have part number 776367, you can replace it with the exact 776367 module. We have it labeled as a…

view full answer...

Answer 5

We do have the Replacement Control Module for Kwikee Electric RV Steps #LC34AF. This is our part number for the Lippert 776367.

view full answer...

Answer 6

Hey Bill, thanks for reaching out! If you're able to activate the switch with a standalone bar magnet then that is a good indicator that the magnet is weak, so you'll want to replace it. These are pretty universal, so if your current magnets…

view full answer...

Answer 7

For a normally closed door switch we have the Lippert Components Kwikee Round Magnetic Door Switch part #LC379400 and for a normally open door switch we have the Lippert Components Kwikee Pleated Plunger Door Switch part #LC379407. So in your…

view full answer...

Answer 8

If you can provide me with the exact model of Kwikee Steps you have then that would certainly help but whenever we hear that the steps are working in reverse that usually means you have the incorrect door switch, normally closed vs normally open or…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

What Door Switches Are Needed For The Kwikee Electric RV Steps Control Module Lippert # 776367

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching