Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the door sensor used to override the automatic retraction on your Kwikee powered RV entry steps. Rectangle tabs mount on the door and doorframe. Wire to steps to stop retraction when they come into contact.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, this is Kevin from etrailer. And today we're gonna be taking a look at the replacement magnetic door switch for Kwikee RV Electric Steps. If you're having issues with your Kwikee electric step going in and out as you open or close your door. Then the number one cause most likely is going to be that door sensor. So your door sensor's gonna come with two parts. There's gonna be one here with two wires and that's gonna hook up to your actual motor home and to the wiring for the steps itself.
And then you're gonna have a separate piece which is just another magnet with a little bracket to hold it in place on the door. So that way anytime it comes close to the magnet on our coach side, it's going to retract the steps. And when our door opens and gets further away, it's gonna break that connection between our two magnets and extend our steps. On our coat side, there's gonna be two wires that are coming off of our magnet. One you can hook up to the power which is gonna be on that pigtail.
And then the other one you can just ground. It doesn't matter which wire you use, it will both work for whatever purpose. It just one has to go to ground and one has to go to power. Installation of your magnetic door switch is super simple. Let me show you how I did that.
So I've got my new magnet and I've already gone ahead and crimped on a ring terminal and just hooked it up and tested it just to make sure that everything's working properly. That there's no other issues with any of our wiring and we had no issues. Step went in and out as our door opened and closed with our magnet. So I know for sure this is good to go. So I'm just gonna trace this back through the opening that we already had.
This originally, it looks like they kind of just drilled into here and passed it through the gasket. Just gonna do the same thing. If I need to, I may just have to take that ring terminal off and just cripple on a new one. But we might be able to just sneak it through there. There is an adhesive backing on here so I'm gonna take that strip of and we'll stick it right on. And I'm gonna also reinsert those screws that are in our previous one. And we're just gonna run some more wire from our new switch back over to our four pole harness. Once again, we're gonna use heat shrink butt connectors. Keep our wirings nice and protected. Put that back on and we can put on our ground. All right, now that we got our wiring hooked back up, I'm gonna go ahead back up top and we'll hook on our other magnet. Make sure this is all working. And then all we gotta do is just shrink up those butt connectors and zip tie it back in place. So I use the door side of my magnetic switch. If I get it close up to it, you can see that it's functioning properly. It's closing the step 'cause it thinks that the door's closed. And as I pull it away, our step opens back up. So we know this is good. Now, one other thing that concerns me is just, there is about a fingers width of space between the magnetic pieces here just because of how the door sits. 'Cause they have it attached to their screen door. So I'm gonna put a finger here just to kind of simulate that. Make sure that if my door closes it's still gonna fit. All right. So even with that amount of space, we're still good to go. If you wanted to test that out yourself before installing it just to make sure that you have it close enough. 'Cause if you don't have it close enough, these two magnets aren't gonna be able to communicate with each other and properly operate the door. But since we're all good to go, I'm gonna go ahead and take the backing off of my adhesive here. We'll stick it back where it was. And try and line it up with the screw holes that we already had. And we'll just reuse those screws from our previous one to ensure it stays in place. Now while you're doing this, you really wanna be careful. This is just plastic on here so you don't wanna drill too hard. You do, and you'll break it right off. All right, now that we get the magnet secure, we'll go ahead and close our door. As you can see, step's popping right in. But open it up, step comes right out. Well, I think about does it for today's look at the replacement magnetic door switch for Kwikee RV Electric Steps. My name's Kevin. Thanks for watching..
Average Customer Rating: 4.8 out of 5 stars (97 Customer Reviews)
Replaces the door sensor used to override the automatic retraction on your Kwikee powered RV entry steps. Rectangle tabs mount on the door and doorframe. Wire to steps to stop retraction when they come into contact.Exactly what we needed! Thanks so much.
After the US Post Office shipped the package around to several places for two weeks, they finally found it and delivered it. Customer Service at eTrailer was very helpful and offered an immediate replacement after the local Post Office told me they couldn't locate it anywhere and it would be best to contact the sender and ask for a replacement, then within an hour, I got notification from the Post Office that it had been found and would be delivered the next day. I called etrailer back and suggested they hold up on sending a replacement. Kudos to Customer Service for how they handled this situation.
Had just what I needed at a good price and quick delivery.
The product was what we ordered and price was good but unfortunately it did not resolve the issue.
Great service
I do a lot of shopping and buying through Etrailer. They have a huge variety of parts and even hard to find parts! I will continue to buy through them!
Did not need it. I will keep it on hand just in case
Was exactly as described. Support from etrailer techs was awesome! Shipped fast and solved my problem.
I ordered a magnet for the power steps on my RV. When I initially submitted the order, I forgot to put down the billing address for my credit card, which is different from my mailing address. etrailer promptly informed me that my order could not be completed and gave me a number to call to get the situation straightened out. I called the number, and the rep was very friendly and helpful. I received the magnet, it works great, and I am very happy with the transaction. Would definitely use etrailer again!
Items I have purchased have been exactly as described. Parts I have ordered are exact replacement for original. ETrailer does a great job. I have purchased tow hitches, bike racks, and RV parts. Excellent customer service.
Needed this product to repair damage done to my motorhome when she was left alone. Have to wire it into my electronic steps. Looks simple enough!.
David
10/14/2020
Perfect part replacement, no issues a year after installation.
Stopped working few weeks after installation.
Not sure why. Not sure it is needed.
Jenny N.
11/11/2022
You mentioned that it had stopped working a few weeks after installation. I wanted to ask a few questions. Have you had the chance to check the wiring to make sure it didnt fray, break, and is still connected? Do you still have the sensor?
This magnet sensor only worked for about two days then quit working , I was going to send it back, I would have liked an exchange for on that was going to work longer.
Jenny N.
3/17/2022
I will have our customer service team reach out to you. The magnet sensor does have a 1 year warranty.
Quinn was amazing getting the help I needed and finally getting everything to make it work! My step works like a brand new one thank you so much for your help!
I called etrailer for help to identify a magnetic switch for my motorhome. etrailer staff were very helpful, found and shiped the switch same day, it was the correct part and I was back in operation in record time. Thank you etrailer.
I needed a new switch for my motorhome automatic steps and found one at etrailer. Perfect replacement, excellent service and it was an easy swap.
Great works perfect easy to install instead on screwing it on I use a good double side tape makes for ease of installation and don't have to hope the holes are the same just add tape and stick in place.
Easy to install and works great after 1 year.
This product was exactly what I was looking for. I installed it and it works like a charm. I would definitely buy from etrailers again and I will let other folks know and encourage them to buy from etrailer.
received yesterday have not installed seems to the exact as ordered thanks
The switch I received was exactly what I needed and expected. It worked perfectly in my RV application. The cost of the switch was comparable to other sites that offered the same switch and it came withing a few days from order.
Worked well thank you!
Once again e-trailer has provided five star service. My order was shipped the same day I ordered. Thanks e-trailer.
Service was good product was good. It just would not work for the application I needed. I will try to return it asap.
Works great once I figured out that it works opposite of the original unit
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeffrey
11/9/2022
After a year nothings changed. It works perfectly and was an exact replacement. Etrailer is always my first stop when looking for replacement rv parts.