Recommended Trailer Wiring for 2024 Kia Telluride LX

Question

Question:

Looking for trailer wiring for my 2024 Telluride LX. Please and thanks.

asked by: Wayne

0

Expert Reply:

Assuming you don't have LED tail lights and you're looking for a 4-way you can use the Curt T-Connector Vehicle Wiring Harness # C93FV. This plugs into the connection points in your rear cargo area. The 4-way will power the signal lights on your trailer.

If you're looking for a 7-way for a trailer with brakes you can use the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK74CR. The wiring harness also includes an adapter that would allow you to plug in a brake controller like the P3 # 90195. If you would like to have the option to use both a 4-way and 7-way you can install the 7-way and pick up a 4-way adapter # PK12716.

expert reply by: Robin H

0

Answer 1

We can definitely help set you up with a tow package for your 2024 Kia Telluride. The main components you will need are a hitch, 7-way wiring harness, and a brake controller. You will need a good ball mount too, but it sounds like you have that…

view full answer...

Answer 2

There are a few ways to determine if you have LED lights on your 2023 Kia Telluride. The easiest is to grab a friend or family member and have them apply the brakes while you watch. If you have multiple bright lights that come on immediately that…

view full answer...

Answer 3

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 4

Yes, there is Jason. We actually have two different options and which one you need is going to depend on whether or not your 2025 Kia Telluride has LED lights. I have listed both of them below: With LED Lights - Curt T-Connector Vehicle Wiring…

view full answer...

Answer 5

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 6

Kia Tellurides are in our install shop all the time for hitch and wiring installs since Kia typically will not install them at the factory. Manufacturers use "tow package" as a buzz word to charge you more typically so you'll want to…

view full answer...

Answer 7

Hey Stephen, thanks for reaching out! For your setup I recommend picking up the etrailer Trailer Hitch Receiver #e45ZR and using the Curt T-Connector wiring kit for the basic 4-Way wiring. You'll need part #C93FV if you have an LX or S, OR the…

view full answer...

Answer 8

Yes, it does! The Curt Hitch item #C13420 does fit the 2024 Kia Telluride. This hitch is custom fit and bolts to your Kia with included hardware. It is a class III hitch with a 2" receiver that has a 5,000 lbs towing capacity and a 750 lbs…

view full answer...

Answer 9

Hey Eric, I am not seeing any other messages from you so I wonder if there was maybe a typo in your email address. But anyway for a hitch the etrailer part #e24ZV would be a great option for your 2025 Hyundai Santa Fe. Then for trailer wiring the…

view full answer...