Is A Brake Light Relay Kit Needed To Install The Roadmaster Invisibrake In A 2023 Jeep Gladiator

Question

Question:

I am moving my Roadmaster invisibrake from a 2017 Ford Edge to a 2023 Jeep Gladiator Mojave. Do I need the Roadmaster brake light kit and the battery charge kit?

asked by: Jim

0

Expert Reply:

The brake light switch wire on a 2023 Jeep Gladiator Mojave isn't useable so you will need to install the Roadmaster Stop Light Switch Kit # RM-751497 for the indicator light of your Roadmaster Invisibrake System # RM-8700. You'll also want to install a charge line kit # RM-156-25 to keep the battery of your Gladiator charged while you tow so that it's good to go once you reach your destination.

expert reply by: Kevin C

0

Answer 1

Hi Jess! We can definitely get your 2009 Jeep Wrangler set up with a 7-way trailer wiring harness. Guessing you do not have the factory towing package? If you are unsure, have a Jeep dealer run you VIN and they will be able to tell you. If you have…

view full answer...

Answer 2

Removing the SMI Air Force One Supplemental Braking System #SM99243 requires removing all of the installed components so that you can reinstall them. You'll need to disconnect the Operating Unit, the Male L brackets, Breakaway Switch, actuator…

view full answer...

Answer 3

The 2009 Jeep Wrangler uses a RoadMaster Stop Light Switch Kit part #RM-751452. Your question is a good question as there are differences with every one. Check out the linked video where my buddy Ryan shows you exactly how to install it.

view full answer...

Answer 4

The Invisibrake #RM-8700 activates through your motorhomes tail lights via the diode wiring installed on your Jeep so you won't be splicing the Second Vehicle Kit for Roadmaster InvisiBrake Braking System #RM-98700 into the brake lite relay kit…

view full answer...

Answer 5

To swap your Roadmaster InvisiBrake #RM-8700 into your new 2020 Jeep Grand Cherokee you'll want the Second Vehicle Kit for Roadmaster InvisiBrake Braking System #RM-98700. This is going to include everything you need to complete the transfer to…

view full answer...

Answer 6

Since you have the Roadmaster InvisiBrake Supplemental Braking System #RM-8700 but not all the components, I recommend the Second Vehicle Kit for Roadmaster InvisiBrake Braking System #RM-98700. This will give you the components you are missing an…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Yes, that is correct Reggie. The Replacement Command Center Tablet for Curt RVibrake 3 item #C57DQ will only work with the Curt RVibrake 3 portable braking system. The newer Curt RVi Series 4 item #RVI44FR does not use a tablet.

view full answer...

Answer 9

Hey Kenneth, the first thing you need to flat tow your 2025 Jeep Wrangler is a base plate kit like the Roadmaster part #RM-521453-5 which is a confirmed fit and easy to use. In addition to the base plates, you will also need a compatible tow bar,…

view full answer...

Answer 10

Hey Donny, for a 5/8 inch lug nut like you have we have the Lionshead Lug Nut Cover #LI74FR which would work great. Did you lose one or are you looking to add them to your wheel?

view full answer...

Answer 11

Hi Brad, There isn't going to be anything really different when installing the second vehicle kit #RM-98700 in your 2024 Jeep Wrangler. The Roadmaster Wiring Kit #RM47ZR is most likely going to be the only difference between this Wrangler and the…

view full answer...

Is A Brake Light Relay Kit Needed To Install The Roadmaster Invisibrake In A 2023 Jeep Gladiator

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching