Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use your Roadmaster InvisiBrake supplemental braking system on a new towed vehicle with this kit. Allows the InvisiBrake to be used with 2 vehicles with additional components.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the second vehicle kit for the Roadmaster InvisiBrake Braking System. Now this kit here is designed to permanently transfer the InvisiBrake supplemental braking system from one vehicle to another. It is designed to fit the Roadmaster InvisiBrake supplemental braking system, part number RM-8700. We do sell that item separate on our website.This kit here will include everything laid out here. It includes the pulley, the cable anchor bracket, the brake pedal clamp with the mounting nuts and bolts, the monitor wire patch cord, the four-way harness, breakaway power and ground, the breakaway switch right here, the pin and the ring, the vacuum check valves, the 3/8 inch and a 1/2 inch, two of the vacuum inaudible 00:00:47, a 3/8 inch and 1/2 inch, the four wire flat harness for the towed lighting, an in line fuse holder with the included 20 amp fuse, an 1/8 inch air line, 1/4 inch nylon vacuum air line, and some rubber vacuum hoses, 1/4 inch, 3/8 inch, 1/2 inch, and the mounting hardware to install everything.Now it may also be used to add the InvisiBrake system to a new vehicle while still retaining it in the original vehicle. If that is what you're wanting to do, there are some additional components that'll be necessary to order to switch the InvisiBrake controller between the two vehicles.
The two part numbers you will need is RM-452109-10, that's the InvisiBrake air cylinder, and part number RM-452109, which is the InvisiBrake cable assembly. Using those two components with this kit will allow you to quickly and safely tow two vehicles using the same InvisiBrake controller. It does come with a nice set of installation instructions which describe how everything is installed but that should do it for the review on the second vehicle kit for the Roadmaster InvisiBrake Braking System.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


















Phil T.
2/25/2022
Works great! No problems.