Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Ted. The Dexter Electric Trailer Brakes #23-47-48 use 14 gauge wire. We recommend using 10 gauge wire like part #10-1-1 which we sell by the foot. For a butt connector I recommend using part #05732-2. These are made for 10 or 12 gauge wire but…
view full answer...Hey John, there's no reason you couldn't use the Blue Ox Wheel Chocks part #BLU47UR on all 4 wheels of your trailer as like a temporary lift. The pair alone has a 30k weight capacity as well so in that regard it would work great too.
view full answer...First I want to make sure you verify your channel mount for the Demco Trailer Coupler #DM14040-81 has a 21K or larger capacity as often times they are less like the Demco #DM15349-52 which often times people look at and think it is a channel mount…
view full answer...The main reason people like oil bath hubs over grease hubs is the oil bath hubs have a less involved maintenance schedule than grease hubs. It is recommended to inspect and repack grease wheel bearings and seals every 12k miles. With oil bath hubs,…
view full answer...Yes, as long as you are installing this on a 7,000 lb axle, you can use these to convert your EZ Lube grease hubs to oil bath hubs. If you aren't sure of your axle size, there should be a tag on the axle with the information or you can just match…
view full answer...EZ lube spindles are more than just a zerk fitting attached to the end of the spindle. There would need to be a hole in the spindle between where the bearings ride for the grease would then fill the hub by. To be perfectly honest using EZ lube…
view full answer...The difference between the Hopkins 7-Way Blade Style Connectors #HM20041 and #H20046 is simply the color of the wires used. The 41 matches closer to what you'd find in the auto industry while the 46 matches better to what you'll find on the…
view full answer...Hello Mike; when installing the #RM47ZR you need to use the taillight wire. I'm assuming you have ParkSense since you got the smart diode kit. If you use the green or yellow brake light wire it will mess with the system on Jeeps that have…
view full answer...I looked up the owners manual for your 2020 Jeep Grand Cherokee. According to the manual the only model that can be flat towed (recreational towing) is the 4 wheel drive model with 4-LO range. As long as that is the model that you have then you will…
view full answer...A lot of RVers still use wheel chocks like Andersen Camper Wheel Chock and Leveler part #AM3604 for extra stability. The chocks will insure the tires do not move back and forth at all. They are especially helpful if you are on very unlevel ground and…
view full answer...You will need the Right Electric Brake Assembly #TRU56FR and Trailer Hub and Drum Assembly #AKHD-865-7-1-EZ-K for your Lippert axle. The brake assembly is self adjusting like your factory brakes and the hub/drum assembly comes pre loaded with all the…
view full answer...For your Dexter 12x2" Brakes, you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for the right side, and #AKEBRK-7L-SA for the left side, as a replacement.
view full answer...Related Searches
Filter Your Search
Contact and Help