Does Curt 7-Way 56431 Fit 2023 Ford Ranger

Question

Question:

Hi, is this kit going to work for the 2023 Ford Ranger xlt? Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector Item # C56431 I have installed already inside the Ranger this one: CURT 51110 Venturer Electric Trailer Brake Controller, Time-Delay. Wiring inside the car is the same of the 2020/22 Ranger.4 wires Thank you

asked by: Marco

0

Expert Reply:

Yes, the Curt 7-way part # C56431 is a confirmed fit for your 2023 Ford Ranger and will work great with your Curt Venturer # C51110.

expert reply by: Jameson C

0

Answer 1

Thanks for reaching out, Mark! According to our research, a 2019 - 2023 Ford Ranger will have 4 blunt cut wires sticking out of a large wire harness on the driver-side firewall that you'll need to splice the brake controller to. So you can…

view full answer...

Answer 2

Based on the picture you provided the OEM 7-way/4-way connector for your 2021 Ford Ranger uses the standard connector as the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #C56431 you were looking at. We actually offer the same…

view full answer...

Answer 3

You can absolutely install the Redarc Tow-Pro Liberty #RED24FR in your 2019 Ford Ranger that has the Curt 7-way Connector Harness #C56431 installed, you will just need the universal wiring harness #RED69FR. While Ford did not run a trailer brake…

view full answer...

Answer 4

Yes, you will. The Redarc Tow-Pro Elite Brake Controller item #RED44FR includes a universal wiring harness that will allow you to hardwire the controller to your Ford Ranger. I have linked an installation video below that will show you how to get the…

view full answer...

Answer 5

If your 2021 Ford Ranger has the factory towing package it will have a factory installed trailer hitch receiver, and a 4-way/7-way connector. If you do not have these components then your truck does not have the factory towing package. I suggest the…

view full answer...

Answer 6

The only solution we have to mount the 7-way of the Tekonsha 7-Way Kit part #TK57VR would be with the part #PK12711U which you'd need to attach to the bottom of the rear bumper.

view full answer...

Answer 7

Yes. The Curt #C56431 tees into the existing factory wiring and will leave your factory 4 way connected, so you'll still have the ability to use that for towing as well. I've linked the installation video of this harness for you to have a…

view full answer...

Answer 8

The Curt T-Connector Vehicle Wiring Harness part #C56431 is an excellent option for a 2019 Ford Ranger. It comes with a 7-way trailer connector so in order to add a 4-way as well while keeping the 7-way you'd need to replace the trailer connector…

view full answer...

Answer 9

The Tekonsha wiring harness item #22124 for your 2021 Ford Ranger XLT uses a power lead because they feel like it's needed but the Curt harness item #C56431 will work just fine and eliminates that extra step during installation. I recommend using…

view full answer...

Answer 10

To install the Redarc Tow Pro Elite Trailer Brake Controller #RED44FR in your 2019 Ford Ranger without the factory tow package you will first need to install a 7-way connector. You will need the Curt T-Connector Vehicle Wiring Harness with 7-Way…

view full answer...

Answer 11

From all the info I could find, the 2020 Ranger and the 2021 Ranger both use the same stock bumper. With that being said, the 7 Way plug that is included with the Curt #C56431 can definitely be replaced with the 7 Way plug from the #HM40975.

view full answer...

Answer 12

Sounds like you've done a great job at installing the Redarc Tow-Pro Elite #RED44FR, and that you're on the right track when it comes to installing the Hopkins Endurance Multi-Tow Plug #HM47180 on your 2019 Ford Ranger! To wrap up your…

view full answer...

Does Curt 7-Way 56431 Fit 2023 Ford Ranger

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching