When Installing the Curt C56431 on a 2019 Ford Ranger Does the Factory 4 Way Still Work

Question

Question:

When the Curt T-connector 7 way item #C56431 is installed on a 2019 Ford Ranger does the factory installed 4 way connector still function?

asked by: Steve H

1

Helpful Expert Reply:

Yes. The Curt # C56431 tees into the existing factory wiring and will leave your factory 4 way connected, so you'll still have the ability to use that for towing as well. I've linked the installation video of this harness for you to have a look at, which shows how this all works.

expert reply by: Erik B

1

Answer 1

Yes, the Curt 7-way part #C56431 is a confirmed fit for your 2023 Ford Ranger and will work great with your Curt Venturer #C51110.

view full answer...

Answer 2

If your 2022 Ford Ranger has the factory tow package then you'll just need the T-One Vehicle Wiring Harness with 7-Way Trailer Connector #22124. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located…

view full answer...

Answer 3

Based on the picture you provided the OEM 7-way/4-way connector for your 2021 Ford Ranger uses the standard connector as the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #C56431 you were looking at. We actually offer the same…

view full answer...

Answer 4

The Tekonsha wiring harness item #22124 for your 2021 Ford Ranger XLT uses a power lead because they feel like it's needed but the Curt harness item #C56431 will work just fine and eliminates that extra step during installation. I recommend using…

view full answer...

Answer 5

The only solution we have to mount the 7-way of the Tekonsha 7-Way Kit part #TK57VR would be with the part #PK12711U which you'd need to attach to the bottom of the rear bumper.

view full answer...

Answer 6

If your 2021 Ford Ranger has the factory towing package it will have a factory installed trailer hitch receiver, and a 4-way/7-way connector. If you do not have these components then your truck does not have the factory towing package. I suggest the…

view full answer...

Answer 7

You can absolutely install the Redarc Tow-Pro Liberty #RED24FR in your 2019 Ford Ranger that has the Curt 7-way Connector Harness #C56431 installed, you will just need the universal wiring harness #RED69FR. While Ford did not run a trailer brake…

view full answer...

Answer 8

From all the info I could find, the 2020 Ranger and the 2021 Ranger both use the same stock bumper. With that being said, the 7 Way plug that is included with the Curt #C56431 can definitely be replaced with the 7 Way plug from the #HM40975.

view full answer...

Answer 9

The Curt T-Connector Vehicle Wiring Harness part #C56431 is an excellent option for a 2019 Ford Ranger. It comes with a 7-way trailer connector so in order to add a 4-way as well while keeping the 7-way you'd need to replace the trailer connector…

view full answer...

Answer 10

Yes, the Tekonsha Prodigy P3 Trailer Brake Controller #90195 will fit and work perfectly on your 2019 Ford Ranger. There is not a factory plug-in port beneath the dash of your Ranger for a brake controller but all of the wiring is already ran. There…

view full answer...

Answer 11

On your 2019 Ford Ranger, there isn't any wiring under the dash for a brake controller. You can either use a wireless trailer brake controller like the Curt Echo #C51180 or you can hardwire a controller of your choice using the wiring kit #5506.…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

When Installing the Curt C56431 on a 2019 Ford Ranger Does the Factory 4 Way Still Work

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching