Best Trailer Hitch For 2024 Toyota Highlander

Question

Question:

what is the best trailer hitch for the 2024 toyota highlander

asked by: Ozzie

0

Expert Reply:

The best trailer hitch for your 2024 Toyota Highlander is the offering from Curt, at the following part number (please note this does NOT fit XSE models but does fit all other models):

- Curt Trailer Hitch Receiver # C45CR

It is the best due to its strength, having the most robust capacities at 6,000 lbs towing/900 lbs tongue weight.

expert reply by: Kyle S

0

Answer 1

Hi Earle; in general, a weight distribution hitch is a no go for unibody vehicles. However, that is not an absolute. I don't see anything specifically calling out weight distribution in the owner's manual so it is possible if the manufacturer…

view full answer...

Answer 2

In regards to the Curt Trailer Hitch Receiver part #C45CR which is a fit for a 2022 Toyota Highlander, you'll remove a metal fascia tab from the passenger side frame rail to allow for installation of the hitch. It will not be reinstalled per the…

view full answer...

Answer 3

Though we do have hitches available for your 2022 Toyota Highlander AWD Platinum Hybrid, like the Curt #C45CR (which is the highest rated option), the largest spare that can be stored under the vehicle after an install will be 18". This is due…

view full answer...

Answer 4

We're glad you found us too, William! I see you've ordered the Curt Hitch #C45CR for your 2022 Toyota Highlander along with the Adapter #e58YR and Anti-Rattle #e99007 - these will work great for your setup! Just note that you'll need an…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hi LaMar, To add a 7-way plug to your 2024 Toyota Highlander SLE you'll need to use the etrailer Universal Installation Kit for Trailer Brake Controllers part #ETBC7. This kit will give you a functioning 4-way flat and 7-way for towing and…

view full answer...

Answer 12

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Best Trailer Hitch For 2024 Toyota Highlander

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching