Replacement Bearing Kit for a 2018 Keystone Montana High Country 305RL With 7K Axles

Question

Question:

2018 305rl fifth wheel with 7000lb dexter axles what bearing and greese seals fit

asked by: Donald

1

Helpful Expert Reply:

Thanks for the photo!

You need the Replacement Bearing Kit # BK3-200 for the 7K axles on your 2018 Keystone Montana High Country 305RL 5th wheel trailer. I confirmed this with my contact from Dexter Axle.

expert reply by: Jon G

1

Axle Tag on 2018 Keystone Montana High Country 305RL
(click to enlarge)

Answer 1

You can use the Timken Grease and Oil Seal #TMK98ZR in place of the Grease Seal #GS-2250DL. While they are not exactly the same seal construction it is still a double lip design and the dimensions are the same so they are going to fit correctly.

view full answer...

Answer 2

There are 2 possible bearing kit options for your 7K Dexter Axles and it all depends on what grease seal inner diameter you need: - Bearing Kit #BK3-210 (2.125" ID) - Bearing Kit #BK3-200 (2.250" ID) Aside from that both kits have the same…

view full answer...

Answer 3

I sure can! To replace the bearings in your 2023 Grand Design with Dexter 7,000 lbs axles you will need the following parts: Inner Bearing - Replacement Trailer Hub Bearing item #25580 Outer Bearing - Replacement Trailer Hub Bearing item #14125A…

view full answer...

Answer 4

First I recommend the SumoSprings Trailer Helper Springs #SS26MV be added to your axles. As these are designed for a single axle you will need 2 of the kits. It seems strange that the springs would be damaged as they are not that old and are likely…

view full answer...

Answer 5

Thanks for sending in the picture of your axle label. Based on that I know that the correct bearing kit is the #BK3-200 which comes with bearings and a seal for a 7k hub.

view full answer...

Answer 6

The majority of 7000lb axles like the Dexter 7000lb axles you have on your 2020 Grand Design Momentum 351M use inner bearing #25580 and outer bearing #14125A but I recommend double checking this as there are still some odd bearing combination…

view full answer...

Answer 7

The Grease Seal #GS-2250DL is the common grease seal size for a Dexter 7,000LB EZ Lube axle. This is a single item or we also have it as a Pair #RG06-070 if you are wanting to replace them both on one axle when you clean out the bearings and hub. The…

view full answer...

Answer 8

The correct bearing and seal kit for your Dexter 7,000 lb axles is going to be either the Bearing Kit part #BK3-210 which has a 2.125" seal or the Bearing Kit part #BK3-200 which has a 2.250" seal. Unfortunately, this axle could have come…

view full answer...

Answer 9

The correct bearing kit you'll need for your 2018 Grand Design Reflection 303RLS would be the part #BK3-200 since we know your trailer has 7k axles. To pick out the correct leaf spring though I would need to know what the length of your current…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Replacement Bearing Kit for a 2018 Keystone Montana High Country 305RL With 7K Axles

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching