Bearing and Seal Kit for Dexter 7k Trailer Axle

Question

Question:

Is it possible to provide me with part numbers for bearings and grease seal by using the attached photo? Thanks in advance,

asked by: Roger M

0

Expert Reply:

Thanks for sending in the picture of your axle label. Based on that I know that the correct bearing kit is the # BK3-200 which comes with bearings and a seal for a 7k hub.

expert reply by: Jameson C

0

Axle Sticker
(click to enlarge)

Answer 1

I sure can! To replace the bearings in your 2023 Grand Design with Dexter 7,000 lbs axles you will need the following parts: Inner Bearing - Replacement Trailer Hub Bearing item #25580 Outer Bearing - Replacement Trailer Hub Bearing item #14125A…

view full answer...

Answer 2

There are 2 possible bearing kit options for your 7K Dexter Axles and it all depends on what grease seal inner diameter you need: - Bearing Kit #BK3-210 (2.125" ID) - Bearing Kit #BK3-200 (2.250" ID) Aside from that both kits have the same…

view full answer...

Answer 3

The correct bearing and seal kit for your Dexter 7,000 lb axles is going to be either the Bearing Kit part #BK3-210 which has a 2.125" seal or the Bearing Kit part #BK3-200 which has a 2.250" seal. Unfortunately, this axle could have come…

view full answer...

Answer 4

Thanks for the photo! You need the Replacement Bearing Kit #BK3-200 for the 7K axles on your 2018 Keystone Montana High Country 305RL 5th wheel trailer. I confirmed this with my contact from Dexter Axle.

view full answer...

Answer 5

First I recommend the SumoSprings Trailer Helper Springs #SS26MV be added to your axles. As these are designed for a single axle you will need 2 of the kits. It seems strange that the springs would be damaged as they are not that old and are likely…

view full answer...

Answer 6

The Grease Seal #GS-2250DL is the common grease seal size for a Dexter 7,000LB EZ Lube axle. This is a single item or we also have it as a Pair #RG06-070 if you are wanting to replace them both on one axle when you clean out the bearings and hub. The…

view full answer...

Answer 7

The majority of 7000lb axles like the Dexter 7000lb axles you have on your 2020 Grand Design Momentum 351M use inner bearing #25580 and outer bearing #14125A but I recommend double checking this as there are still some odd bearing combination…

view full answer...

Answer 8

The correct bearing kit you'll need for your 2018 Grand Design Reflection 303RLS would be the part #BK3-200 since we know your trailer has 7k axles. To pick out the correct leaf spring though I would need to know what the length of your current…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Scott. To add a 7-way and 4-way connector to your 2024 GMC Sierra 3500 that can be used at the same time, I recommend the TowSmart ProClass Trailer Connector item #TS49RR. It's going to replace the factory one and mount in the same position…

view full answer...

Bearing and Seal Kit for Dexter 7k Trailer Axle

Product Page this Question was Asked From

Continue Researching