Replacement Bearing Kit for 2018 Grand Design Reflection 5th Wheel

Question

Question:

I have a 2018 grand design reflection fifth wheel 303RLS . I want to replace the leaf springs and also the bearings ,can you give me the correct numbers I need ? Thank you !

asked by: Joe B

0

Expert Reply:

The correct bearing kit you'll need for your 2018 Grand Design Reflection 303RLS would be the part # BK3-200 since we know your trailer has 7k axles. To pick out the correct leaf spring though I would need to know what the length of your current spring is.

expert reply by: Jameson C

0

Answer 1

The Grease Seal #GS-2250DL is the common grease seal size for a Dexter 7,000LB EZ Lube axle. This is a single item or we also have it as a Pair #RG06-070 if you are wanting to replace them both on one axle when you clean out the bearings and hub. The…

view full answer...

Answer 2

The majority of 7000lb axles like the Dexter 7000lb axles you have on your 2020 Grand Design Momentum 351M use inner bearing #25580 and outer bearing #14125A but I recommend double checking this as there are still some odd bearing combination…

view full answer...

Answer 3

The correct bearing and seal kit for your Dexter 7,000 lb axles is going to be either the Bearing Kit part #BK3-210 which has a 2.125" seal or the Bearing Kit part #BK3-200 which has a 2.250" seal. Unfortunately, this axle could have come…

view full answer...

Answer 4

There are 2 possible bearing kit options for your 7K Dexter Axles and it all depends on what grease seal inner diameter you need: - Bearing Kit #BK3-210 (2.125" ID) - Bearing Kit #BK3-200 (2.250" ID) Aside from that both kits have the same…

view full answer...

Answer 5

I sure can! To replace the bearings in your 2023 Grand Design with Dexter 7,000 lbs axles you will need the following parts: Inner Bearing - Replacement Trailer Hub Bearing item #25580 Outer Bearing - Replacement Trailer Hub Bearing item #14125A…

view full answer...

Answer 6

Thanks for the photo! You need the Replacement Bearing Kit #BK3-200 for the 7K axles on your 2018 Keystone Montana High Country 305RL 5th wheel trailer. I confirmed this with my contact from Dexter Axle.

view full answer...

Answer 7

First I recommend the SumoSprings Trailer Helper Springs #SS26MV be added to your axles. As these are designed for a single axle you will need 2 of the kits. It seems strange that the springs would be damaged as they are not that old and are likely…

view full answer...

Answer 8

Thanks for sending in the picture of your axle label. Based on that I know that the correct bearing kit is the #BK3-200 which comes with bearings and a seal for a 7k hub.

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Scott. To add a 7-way and 4-way connector to your 2024 GMC Sierra 3500 that can be used at the same time, I recommend the TowSmart ProClass Trailer Connector item #TS49RR. It's going to replace the factory one and mount in the same position…

view full answer...

Answer 12

Hey Steve, welcome back! To add a set of air bags to your 2024 GMC Sierra 3500 dually, I recommend the Firestone item #F2613. These air bags have a 5,000 lbs capacity that are going to level out your rear end. Seeing as how you only tow a few times…

view full answer...

Replacement Bearing Kit for 2018 Grand Design Reflection 5th Wheel

Product Page this Question was Asked From

Continue Researching