Parts Needed To Install The Thinline LED Trailer Lights # STL64RB

Published 11/02/2023

Products Featured in This Question

Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 15 Diodes - Red Lens

(1515)

$24.75

16 Gauge Primary Wire - Black - Per Foot

(62)

$1.06

Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1

(72)

$1.21

Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 10

(1125)

$16.82

Wire Cutters with In-Handle Crimper and Bolt Cutter - 8" Long

(7)

$8.40

Hook Probe Circuit Tester

(65)

$12.94

Performance Tool Crimping Pliers - 10 to 22 AWG Wire - 9-1/2" Long

(11)

$17.40

Question:

Hello. I’m looking to add two additional tail/stop/turn signals to the back of my motor home like Item # STL64RB. What else will I need to purchase to install these correctly? Thank you

asked by: Mark

Expert Reply:

The Thinline LED Trailer Tail Light # STL64RB is pretty easy to install, you'll just need some butt connectors # DW05744-10, self tapping screws to mount the lights, a couple of ring terminals # DW05702-1 to easily mount the ground wires to the frame of the trailer, and possibly some extra wiring # 16-1-1 to bridge the gap between the lights and trailer wiring. You'll need some wire strippers # PT43ZR and crimpers # PTW30764 to secure the wires to the butt connectors and ring terminals. The wire functions of these lights are as follows:

White - Ground
Red - Stop/Turn Signal
Black - Tail Light

You might also need a tester # PTW2993 in order to determine the functions of the trailer wiring you'll be tapping into when installing the lights.