TrialeTrailer Hitch & Wiring Harness For 2022 Toyota Prius

Question

Question:

is there a trailer hitch and wiring harness that fits the 2022 toyota prius?

asked by: Walt

0

Expert Reply:

There is both a trailer hitch receiver and wiring harness that fits your 2022 Toyota Prius. I verified with the manufacturer that what you need is the following:

- Curt Trailer Hitch Receiver # C11473

- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56353

expert reply by: Kyle S

0

Answer 1

The best option for a spare tire mount on your Apogee Adapt-X 300 trailer will be the Fulton Hi-Mount Spare Tire Carrier #FSTC1000301. This can be mounted to the tongue or the front section of the bed on your Apogee Adapt-X 300 depending on how much…

view full answer...

Answer 2

Hey Linden, thanks for reaching out. That is a great question actually because the #C59236 and #C59496 are extremely similar. Basically, both are the same kind of universal hardwire 4-flat harness with install kit. The #C59496 is a kit that we…

view full answer...

Answer 3

Which specific 3 to 2 converter are you looking at from Curt? The part #C56330 that you referenced? If so, this would work if the taillights of the vehicle are LED so I would not suspect this being the issue.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

TrialeTrailer Hitch & Wiring Harness For 2022 Toyota Prius

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching