Are Individual Mounts Available For the HappiJac Camper Tie Downs For 2015 Ford F-250?

Question

Question:

Is it possible to purchase a single happy Jack truck camper tie down?

asked by: Sally O

0

Expert Reply:

We do carry the Replacement HappiJac Rear Tie-Down # LC182866 for the HappiJac Camper Tie-Downs # LC182910-182971 which fits your 2015 Ford F-250. We also carry the Replacement Anchor Plates # LC182876 and Stabilizer Bar # LC182971 depending on what mounting point you need.

expert reply by: Bud M

0

Answer 1

The stabilizer bar and brackets will be bolted inside the bed and the front anchoring plate will be bolted on between the bed and the cab. If you don't have enough space to get your hand and the plate between them then you'll have to unbolt…

view full answer...

Answer 2

I checked with Happijac and the kit you need for your 2011 Ford F-250 is the part #LC182910-182971 for the tie downs and then for the turnbuckles #LC182897. This is a much better setup than a stake pocket attachment for a camper so I would not…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Answer 9

Hey Jack, yes the Torklift camper tie downs part #TL63PR are the correct set for your 2024 Ford F-350 Tremor with a short bed and factory hitch. The turnbuckles part #TLS9526-2 that you referenced as well would be a great set that matches what you…

view full answer...

Answer 10

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Answer 11

Hello Josh, I completely understand where you are coming from. When you need long, equal-length turnbuckles to span about 35 inches on a 2022 F-350 with a Lance 1130, the goal is a setup that fits cleanly, installs easily, and stays secure without…

view full answer...

Answer 12

Hey Lori, thanks for reaching out! The TorkLift Tie Downs #TL87DR are a custom-fit kit, so there’s no drilling required on the truck itself. Everything bolts up to existing holes in the frame, which helps keep the install pretty straightforward. As…

view full answer...

Are Individual Mounts Available For the HappiJac Camper Tie Downs For 2015 Ford F-250?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching