Recommended Hitch for a 2023 Toyota BZ4X

Question

Question:

Do you have a trailer hitch for 2023 Toyota BZ4X? I believe its the same model for the 2023 Subaru Solterra. Thanks

asked by: Kris

0

Expert Reply:

Yes, we do! The Curt Trailer Hitch item # C92NR is the only hitch available for a 2023 Toyota BZ4X. It is a 2" hitch with a 200 lbs tongue weight capacity. This hitch is custom fit and bolts to your BZ4X with included hardware.

Please note this hitch is only rated to be used with accessories like bike racks and cargo carriers. There are no tow capable hitches available for your Toyota.

expert reply by: Jerred H

0

Answer 1

You are in luck because there is one hitch for a 2023 Subaru Solterra and it can only be used with hitch mounted accessories like a bike rack. It is the Curt Rack Receiver item #C92NR. This hitch is custom fit and bolts to your Solterra with included…

view full answer...

Answer 2

I pulled up the owners manual online to try and verify the kick open needing to be disabled and was not able to locate that specifically. But I was able to find that the kick sensor is located behind the lower, center part of the rear bumper. This…

view full answer...

Answer 3

While we have not had a 2023 Toyota BZ4X in our shop to install the Curt Trailer Hitch Receiver #C92NR, it does not appear it would prevent the operation of the foot activated liftgate sensor. Since the main cross tube sits behind the bumper cover…

view full answer...

Answer 4

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 5

Hey Richard, thanks for reaching out. It sounds like you are looking for the Kuat Tray Extension part 016-036-00-01. I am sorry to say that we do not offer this part so it is not something we have stocked here. It looks like they are not even…

view full answer...

Answer 6

The Curt Rack Receiver item #C92NR is made in the USA. This hitch is custom fit for the 2023 Subaru Solterra. It has a 200 lbs tongue weight capacity and should not be used for towing.

view full answer...

Answer 7

While we do carry both the Curt 13544 #C92NR and Draw-Tite 76638 #DT46PR trailer hitch receivers for your 2023 Subaru Solterra we do not have any dimensional drawings for either. These are not given out as it would allow someone to just simply have a…

view full answer...

Answer 8

Hey Jason, The EcoHitch Stealth Trailer Hitch Receiver #EH97CR weighs 40lbs and the Curt Rack Receiver #C92NR weighs approximately 30lbs. The3 Curt is rated only for carrying hitch mounted accessories and isn't rated for towing a trailer.…

view full answer...

Answer 9

Hey Eliot, so if towing is on the table then I would go with the Draw Tite #DT46PR but if not I would go with the Curt #C92NR since it has better ground clearance by about an inch. The Curt does sit up tighter to the rear bumper like you noticed.…

view full answer...

Answer 10

Our Curt hitch #C92NR that fits your 2023 Toyota BX4X is over-rated for your vehicle so you'd still be limited to the 110 lbs that Toyota has for it. The hitch is designed and independently rated which is why it has a higher capacity than…

view full answer...

Answer 11

Congrats on the new vehicle! We do have a 2" hitch for your 2024 Subaru Solterra. It is the Draw-Tite item #DT46PR. This hitch is custom fit and bolts to your Kia with included hardware. It has a 2,000 lbs towing capacity and a 300 lbs maximum…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Hitch for a 2023 Toyota BZ4X

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching