Trailer Hitch Receiver For 2024 Genesis GV80

Question

Question:

is there a trailer hitch receiver for 2024 Genesis GV80

asked by: Ellis

0

Expert Reply:

Yes, there is a trailer hitch receiver that fits your 2024 Genesis GV80, from Curt, at the following part number:

- Curt Trailer Hitch Receiver # C84UR

I verified this fit directly with the manufacturer for you

expert reply by: Kyle S

0

Answer 1

Hey Russ! The bad news is it looks like we didn't grab that measurement when we installed the #e65KR on the 2025 Genesis GV80. The good news is, I can still answer your question. The Curt #C84UR actually shares the same design as our own etrailer…

view full answer...

Answer 2

The 2021 Genesis GV80 may already have a 4 pin trailer adapter installed from the dealer and you can convert it to a 5-pin. If it does not have a 4 pin already, then you will need to install the Curt Tail Light Converter 4-Pole Flat Trailer Connector…

view full answer...

Answer 3

I would be happy to! To add a hitch to your 2024 Genesis GV80, I recommend the etrailer item #e65KR. This hitch is custom fit and bolts to your Genesis with included hardware. I really like the etrailer Hitch because the crosstube mounts behind your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Trailer Hitch Receiver For 2024 Genesis GV80

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching