Correct Replacement Dome For A FanTastic Vent 4000T Model

Question

Question:

I have a fan-tastic 4000t with broken lid from a 1993 motorhome. Looks like this K1020-19. Can you confirm that the K1020-19 is the correct lid for me?

asked by: Paul

0

Expert Reply:

The Replacement Dome # FVK1020-19 is indeed the correct lid for your Fantastic 4000T roof vent. We have confirmed this with the manufacturer on multiple occasions. The hinge and lift arm attachments will match up nicely.

expert reply by: Jesse M

0

Answer 1

Hey Mike, For a Fan-Tastic Vent RV roof vent FV4100 you'll need the Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans #FVK8017-00. This replaces both the motor and the fan blade.

view full answer...

Answer 2

There are two types of lift arms for the Fan-Tastic Vent Roof Vents, part #FVK8011-05 if you have a dome shaped lid or part #FVK8014-05 if you have a flat shaped lid. If you previously had a flat shaped lid and switched to the dome shaped lid then…

view full answer...

Answer 3

It sounds like you have the standard garnish for Fantastic Vents, but you will need one more measurement to make sure you get the correct one. This being the height of the leg. The Fantastic Vent Ceiling Garnish #FVK1060-80 will have a 6" leg…

view full answer...

Answer 4

Yes, the Dometic Fan-Tastic RV roof vent garnish part #FVK1060-81 that you referenced is correct for your Fan-Tastic RV roof vent part FA1200HWISD81.

view full answer...

Answer 5

We have several replacement garnishes for the Fan-Tastic Vent Model 4000 in various colors and lengths: We have the Ceiling Garnish for Fan-Tastic Vents Roof Vent with 6" leg in White, #FVK1060-81. The garnish in black is, #MA10-20209.…

view full answer...

Answer 6

Hey Aaron, since it's a Fan-Tastic roof vent the correct lid would be the part #FVK1020-19 that you referenced. They've only used the one roof vent lid design over the years.

view full answer...

Answer 7

The needed replacement part in smoke/tinted is, #FVK1020-19; this fits all 4000 series units like what you have on your motorhome.

view full answer...

Answer 8

There isn't really any info available on the FV5300 so you'll need to check the hinge bolt hole spacing to see if it matches the #FVK1020-19 you were looking at and that the lift arm sits on the right side of the vent. If your lift arm sits…

view full answer...

Answer 9

Yes, the replacement Fan-Tastic Vent Lid part #FVK1020-19 does fit the Fan-Tastic FV1200.

view full answer...

Answer 10

To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example. Short styles will measure 61-1/2" and use part…

view full answer...

Answer 11

Since we don't have a confirmed fitting replacement for a 7300 I recommend taking a few measurements of your current cover's mounting hole locations and seeing it will match up to the Replacement Dome for Fan-Tastic Vent RV Roof Vents -…

view full answer...

Answer 12

Looks like the correct replacement vent lid you would need is the part #FVK1020-19. This is the correct replacement vent lid for Fantastic roof vents like your LF8000.

view full answer...

Correct Replacement Dome For A FanTastic Vent 4000T Model

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching