Replacement Spring Hangers And Suspension Components For 8,000 lb Axles

Published 09/08/2023

Products Featured in This Question

Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 42-1/4" Axle Spacing

(28)

$345.92

Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long

(753)

$10.96

Front Hanger for 2" Wide Slipper Springs - 3-9/16" Tall - 9/16" Bolt Hole

(44)

$9.16

7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long

(248)

$90.83

6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 29-1/2" Long

(248)

$81.94

Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter

(164)

$36.10

Question:

I’m looking for a replacement spring hanger set up. Tandem axle, 8000 LB axles. 3.5” diameter. 43.5 center to center. Equalizer bar is 20 3/4” total length with a greaseable center. Springs are 2”, 7 pack. Front hangers are 3” wide by 5.5 “ tall. Rear are 3”x7”. Front hanger to mid is 35.25” center to center. Mid to rear is 33.375. 4.5” top of axle to frame.

asked by: Kerry B

Expert Reply:

I can certainly point you in the right direction on a few of the parts you will need. Unfortunately we do not carry a 20-3/4" long equalizer, so we do not have any kits that would accommodate that hanger size and axle spacing. We do have a few hanger kits for 2" wide slipper springs like the # H202. This comes with 4-1/4" tall front hangers, 3-1/2" tall center hangers and 5-1/4" tall rear hangers. We do not have any hangers that are 7" tall.

We do have the Wet equalizer bolt # TRFA71063, and spring eye wet bolt # 126B2. We also have leaf springs for 8K axles like the # e37SR or # e39SR depending what length you need. Those would be the only components of this setup we can provide.

expert reply by: Jesse M