Which Furrion Backup Camera System for a Prewired Rockwood Trailer?

Question

Question:

I have a 2019 Rockwood Geopro G16TH. It is prewired for Furrion cameras. Which kit would I need ro add cameras?

asked by: Chris G

0

Expert Reply:

Since your Rockwood Trailer comes prewired you will want the Furrion Vision S Wireless RV Backup Camera System w/ 3 Cameras item # FCE48TASL-05. This system includes a 5" monitor, rear camera, and two side marker cameras.

If you are just wanting the rear camera and monitor you'll need the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision item # FOS05TASF.

expert reply by: Jerred H

0

Answer 1

The old Furrion system you have will not allow you to add an additional camera. To get that separate camera for backing up, I recommend updating your system or adding to it. The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless -…

view full answer...

Answer 2

Great question! The 5" monitor on the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision #FOS05TASF is more than capable to handle 3 cameras. As a matter of fact, this monitor can handle up to 4 camera inputs with a nice 120°…

view full answer...

Answer 3

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 4

*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…

view full answer...

Answer 5

Hey Lisa, thanks for reaching out. Yep this is a pretty common issue with these brake systems. The best way to resolve it is with a charge line kit like part #RM-156-25. This allows the towed vehicles battery to draw a charge from the motorhomes…

view full answer...

Answer 6

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 7

Hey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + #FR57AD that you have so you would need a solution like the part #VGR64VR that you referenced. Or if you don't want to mess with any wiring you could…

view full answer...

Which Furrion Backup Camera System for a Prewired Rockwood Trailer?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching