Weight Distribution Hitch Shank For Equal-i-zer With 12" Between Hitch Pin Hole and Mounting Holes
Published 08/25/2023
Products Featured in This Question
Question:
Im looking for a new shank for my Equilizer hitch. 2022 F150 w/ 2023 Keystone Cougar 27BHS. I currently have both the 12 and 18 Equalizer shanks. With the 18 shank 14" pin hole to bolt holes I am able to open my tailgate with the electric jack head facing forward normal position. Im hoping to spin the jack head 90 degrees and find a shank inbetween to eliminate unneccesary shank extension, but still allow me to open my tailgate. I need a shank that is approximately 11-12 between the pin hole and the shank bolt holes. Do you have another brand shank that would fit this use? The standard equalizer /rise is fine for our use.
asked by: Sonny W
Expert Reply:
The Blue Ox SwayPro Weight Distribution Shank # BXW4001 spreads the hitch pin hole to the vertical mounting holes 12" on center. This uses the same hole separation of 1-1/4" on center.
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 700 lbs TW
- 800 lbs TW
- 900 lbs TW
- 1000 lbs TW
- 1200 lbs TW
- 1300 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 12" Long - 7 Hole Adjustment
- Search Results: weight distribution hitch
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Video: What to Know About the Equal-i-zer Weight Dist Shank
- Video: Review of Blue Ox Replacement Spring Bars SwayPro Weight Distribution System - BXW4008
- Video: All You Need to Know About the Blue Ox SwayPro Weight Distribution Shank for 2" Hitches
- Shop: Blue Ox TrackPro Weight Distribution Shank for 2" Hitches - 18" Long - 7 Hole Adjustment
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Shop: Trailer Hitch
- Shop: Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
- Shop: Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
- Video: Let’s Check Out the Roadmaster Anti-Rattle Hitch Extender for Tow Bars
- Video: What to Know About the Roadmaster Hitch Extender for Tow Bars
- Video: Replacement Head for Blue Ox SwayPro Weight Distribution Systems Review
- Video: Review of Gen-Y Hitch Torsion Weight Distribution Shank 2-1/2 Inch Receiver - GY92NR
- Q&A: Why is 1-1/8 Inch Socket Needed to Install Blue Ox TrackPro Weight Distribution System
- Q&A: Will A Longer Shank On An Equal-i-zer WDH Help With Turning And Tailgate Clearance
- Q&A: Longer Weight Distribution Shank to Lower Tailgate Without Hitting Trailer Jack
- Search Results: adjustable trailer coupler
- Search Results: trailer brake controller
- Search Results: trailer tongue lock
- Search Results: hitch extender hitch adapters
- Search Results: trailers hitch adapters
- Search Results: trailer jack
- Q&A: Is there an Extended Weight Distribution System for Better Turning Clearance?
- Q&A: Extended Shank for a Weight Distribution System
- Q&A: What is the Capacity of the Equal-i-zer Weight Dist Shank EQ90-02-4500?
- Q&A: Is There an 18 Long Weight Distribution Shank that is for a 2-1/2 Hitch
- Article: 5 Things to Know About Weight Distribution Hitches
on Accessories and Parts
