Recommended Hitch for a 2023 Ford Bronco

Question

Question:

What is the best hitch for a 2023 Ford Bronco?

asked by: Hal

0

Expert Reply:

The best hitch for your 2023 Ford Bronco is going to be the Curt item # C76WR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight.

The reason this hitch is the best option for your Bronco is its ease of install. The Curt item # C76WR attaches to your rear bumper bar with 4 bolts. No cutting or trimming required.

If you are planning on towing you will also need a wiring harness item # C42WR for LED tail lights or item # C87BR for incandescent lights and a ball mount kit item # C45534.

I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.

I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like once installed.

expert reply by: Jerred H

0

Ford Bronco
(click to enlarge)

Answer 1

Hey Mike, to add trailer wiring to your 2024 Ford Bronco you will need one of two kits. You would want the part #C42WR if the vehicle has LED taillights or the part #C87BR if it didn't come with LED taillights.

view full answer...

Answer 2

Hi Stephen; the design and size of the Curt #C76WR really doesn't allow for a mounting point for the #HM40975. The only option to mount the bracket is on the bumper beam next to the hitch or on the plastic as seen in the picture below where…

view full answer...

Answer 3

From the sound of your question, it sounds like you are wanting an option for both a 4-way and a 7-way to install into your 2021 Ford Bronco and do not currently have any wiring. For a plug-in 4-way harness, I recommend the T-One Vehicle Wiring…

view full answer...

Answer 4

The Curt Powered Tail Light Converter Kit #C59236 comes with everything needed to get it installed, but I do recommend picking up the Mounting Bracket #18144 as well so you have a way to keep the 4-Way connector near your hitch receiver for easy…

view full answer...

Answer 5

The best option to add a hitch to your 2023 Ford Bronco is the Curt Trailer Hitch item #C76WR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing…

view full answer...

Answer 6

Thanks for the picture! You won't need an extender plus that will cut your capacity. To clear your Bronco's spare tire you're going to want the Curt Ball Mount for 2" Hitches item #D-28. This extended ball mount has a 6" drop…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 11

Thanks for the information Bob! Flat towing a leased 2025 Ford Bronco Badlands without making any modifications is going to be creative when it comes to powering your lights and a braking system but we do have all the parts you'll need. I've…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Recommended Hitch for a 2023 Ford Bronco

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching