Replacement Axle And Disc Brake Kit For A 2013 MFI Boat Trailer
Updated 08/22/2023 | Published 08/21/2023
Products Featured in This Question
Question:
I have a 2013 mfi trailer mfg for my 2013 Blazer 202 Pro V. I need a complete rear axle assy, everything except the calipers. The axle is 89x74 with a 4.5 . Could you please give me a list of needed parts including pads. Wheel mount is 5x4.5. Also my calipers are in good shape and would like to retain them if oossible
asked by: Bob R
Expert Reply:
We do carry an 89" long axle with a 74" spring center. We have the # e53GR which is a 3,500 lb axle with a 4" drop.
We also have the # e38GR which is a straight axle beam with no drop.
We also have the disc brake kit # KOD59FR. This kit comes with everything. Including 5 on 4-1/2" hubs, bearings, seals, races, lug nuts, rotors, calipers and brake pads.
If you want to keep the current calipers, I would need to know what brand you have, as the rotors and calipers are generally brand specific. We may be able to offer individual components if you do not want to have to buy calipers. It is generally recommended (as well as more cost effective) to buy a whole kit complete with new calipers. The way I see it, you will be taking all of it apart anyways, you might as well replace everything you can while you are at it.
Product Page this Question was Asked From
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Search Results: trailer fenders
- Q&A: How to Find Replacement Axle for Hurricane HUR 2178 Boat Trailer
- Q&A: Replacement 2000lb Trailer Axle for 2000 Trailstar Tracker
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
- Shop: Tandem Axle Teardrop Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Hubs and Drums
