Will 10 Gauge Wire Fit Inside Axle Tubes For Powering Brake Assemblies?
Updated 08/21/2023 | Published 08/18/2023
Products Featured in This Question
Question:
Can I use a 10 gauge wire through the axles?
asked by: Gregory L
0
Expert Reply:
Yes, you can use 10 Gauge Wire # 10-1-1 to route through your axles to power your Electric Brakes # K23-478-00 Do be sure the Grommet # 046-124-00 is in place on your axle tube to prevent the wire from fraying entering the axle tube.
expert reply by:
Bud M
0
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 4,400 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 4400 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Search Results: 3500 lb axle with brakes
- Video: An In-Depth Look at the Dexter Trailer Axle w/ Electric Brakes
- Shop: Dexter Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs
- Shop: Trailer Wiring 7-Way Upgrade Kit
- Shop: Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Article: Trailer Wiring Diagrams
- Search Results: wire
- Shop: 10 Gauge Wire - Blue Primary - Per Foot
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Video: Detailed Breakdown of the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Video: Review of SnapPad RV Jack Pads - XTRA Square 6 Jack Pads Level Up Leveling Jacks - SN99FR
- Article: Testing Trailer Brake Magnets for Proper Function
- Video: Breaking Down the Replacement Brake Wire Grommet for Dexter Electric Brake Assemblies
- Video: Complete Breakdown of the Replacement Snap-In Grommet for Dexter Trailer Axle Tube Wire
- Q&A: Snap In Brake Grommet for Dexter 7K Axle
- Q&A: What Circuit Breakers Are Required for Electric Trailer Brake Controller Installation
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Q&A: Diameter of the Axle Brake Grommet 046-016-00
- Q&A: What Axle Does Replacement Snap-In Grommet # 046-124-00 Fit
- Q&A: Replacement Brake Assemblies for a Lippert 4,400 lbs Axle
- Q&A: Amperage of Brake Magnets and Size of Wire Used To Connect 7-Way Trailer Plug To Electric Brakes