Replacement Trailer Axle Grease Seal Options For Hub Using National 203025 Seal

Question

Question:

Good afternoon. I am looking for a trailer wheel bearing seal. The markings on the old seal say National 203025 could you please recommend a suitable replacement? Thank you

asked by: Cyrus

0

Expert Reply:

I do have a couple possible options for you as we do not carry an exact replacement for your National 203025. We have the Bearing Buddy Seals # BB60001 designed for a 1" spindle using Bearing # L44643 or Seals # BB60005 designed for a 1-1/6" spindle using Bearing # L44649. These utilize a stainless steel ring for a polished grease seal surface.

expert reply by: Bud M

0

Answer 1

I do have an option that may work for you however, none of our trailer axles have a spring center to spring center measurement of 48" and a hub face to hub face measurement of 57.5". Therefore, no, the CE Smith Trailer Axle w/ Idler Hubs…

view full answer...

Answer 2

Based on your spindle measurement where the bearings ride it sounds like you have #L44649 for the bearings which means the correct Bearing Buddy seal set is part #BB60005. Although, with those bearings you should have a BTR spindle and the location…

view full answer...

Answer 3

It looks like you did your homework Ron, because the Bearing Buddy #BB1980A and the Spindle Grease Seal Set #BB60001 are indeed the proper parts for the #AKIHUB-545-2-1K idler hub assembly. This hub uses the #L44643 inner bearing, so the bearing…

view full answer...

Answer 4

Hello Curt, We do not have spindle sleeves for individual sale. Instead you will want the Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy #BB60005. I tried to cross reference the part numbers you provided but came up empty…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Replacement Trailer Axle Grease Seal Options For Hub Using National 203025 Seal

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching