bing tracking image
Q & A Icon

Replacement Bearing Kit For A 2016 Jayco X19H Hybrid  

Updated 07/31/2026 | Published 07/25/2026

Question:

I would like assistance to order the correct new bearings and seals and pins Thanks combo for my 2016 Jayco x19h hybrid , Lippert axles 2200

0

Expert Reply:

Hi Lee, cool camper!

For 2,200 pound axles, you are going to want the Lippert Complete Bearing Kit for 2,200-lb Trailer Axles - L44649 Bearings, L44610 Races # LC23ZP. This includes the bearings, races, seal, cotter pin, and tang washer. It will be everything you need for one hub. So if you have two hubs, you will need tow of these kits, so on and so forth.

I do need to ask though, are you 100% sure they are 2,200 pound axles? I couldn't find anywhere online saying what capacity the axles are that come on a 2016 X19H, but the pictures I found of drums/hubs made it look like 3,500 pound axles (though I will admit there weren't many pictures I could find). Those could have been upgrades people made, but it wouldn't hurt to double check your axle capacity. It should be on the VIN plate or there will be a tag/sticker on the axle itself.

Where do you typically take your camper?

expert reply by:
0
Lazer S
Lee B. profile picture

Lee B.

7/30/2026

I just bought the camper, and not sure if bearings have ever been done, I copied the v1n for you RESP MFR: FABRICANT RÉSP: GWR:/PNBVKG 4950 2247 Jayco V.IN./N.IV 1UJBJHBJSG1JH0244 SIZE/DIMENSION TIRE/PNEU RIMS/JANTE ST205/75R14C 14 X 5.5 JJ 03/16 PRESS./COLD INFL. PRESS./GONFL FROIL GAWR/PNBE KG 2200 999 FRONT/DEVANT INT/CENTRAL 2200 999 REAR/ARRIÉRE PSI/LPC 50 KPA 345 ST205/75R14C 14 X 5.5 JJ 50 345 TYPE OF VEHICLE/TYPE DE VÉHICULE: THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S. FEDERAL MOTOR VEHICLE SAFETY STANDARDS AND STANDARDS PRESCRIBED UNDER THE CANADIAN MOTOR VEHICLE SAFETY REGULATIONS IN EFFECT ON THE DATE OF MANUFACTURE SHOWN ABOVE. TRAILER/REMORQUE CE VEHICULE CONFORME a TOUTES LES NORMES QUI LUI SONT APPLICABLES EN VERTU DU REGLEMENT SUR LA SECURITE DE VEHICULES AUTOMOBILES DU CANADA ET DES ETATS UNIS EN VIGUEUR á LA DATE DE SA FABRICATION CI -DESSUS. RECREATION VEHICLE TRAILER CARGO CARRYING CAPACITY VIN: 1UJBJHBJ6G1JH0244 THE WEIGHT OF CARGO SHOULD NEVER EXCEED: * 534 kg. OR ( 1177 Lbs.) nATION.

Lee B. profile picture

Lee B.

7/30/2026

Can I just order the seals ?

Lazer S. profile picture
Etrailer Expert

Lazer S.

7/30/2026

@LeeB Thanks for all that info! It proved extremely helpful! ^___^ So I was both right and wrong. You do technically have 3,500 pound axles (at least in configuration), but they are capped at 2,200 pounds per axle. I honestly can't say why that is, but it's the info I got directly from Lippert. So with that being said, you will need the following bearing kit: Lippert Complete Bearing Kit for 3.5K Trailer Axles - L44649/L68149 Bearings, L44610/L68111 Races # LC55ZP It has the bearing, races, seal, cotter pin, and tang washer, but all fit to the larger axle. If you are just needing the seals though, that would be the Lippert Grease Seals - Double Lip - ID 1.719" / OD 2.565" for 3,500-lb to 4,400-lb Axles # LC32VP.
Lee B. profile picture

Lee B.

7/30/2026

@LazerS. Ok. Thank you so very much
Lazer S. profile picture
Etrailer Expert

Lazer S.

7/31/2026

@LeeB You're very welcome! Just let me know if there is anything else I can help with!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>