Do You Have to Use the Monitor Included With the Furrion Vision S & TireMinder TPMS

Question

Question:

Hello. I have questions about travel trailer backup cameras, tpms and tow mirror extensions. I have a 2022 GMC Sierra 1500 AT4 with all cameras and trailer towing monitoring as part of the infotainment center. The trailer is a 2022 Grand Design Imagine XLS 22MLE and is pre-wired for the Furrion backup camera. Do I need the external monitors that come with the Furrion and Tire Minder backup camera and TPMs systems? If not needed, is it possible to purchase them without the monitors? Also for tow mirror extensions, do the K Source Snap and Zap allow full camera view and folding? Thank you

asked by: David V

0

Expert Reply:

You are still going to need the monitors that come with both the Furrion Vision S # FOS43TASF and the TireMinder i10 TPMS # TM89FR.

The pre-wire for your trailer just means the wiring for a Furrion camera system is already ran so you'd just have to plug the camera in and you'd be set.

Also, the K-Source Snap & Zap Custom Towing Mirrors # KS80930 will not interfere with the camera functionality on your mirrors because there is a cut out at the bottom of the mirrors for just this, and they will allow you to fully fold into the vehicle.

expert reply by: Bryce D

0

Answer 1

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 2

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 3

Hey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + #FR57AD that you have so you would need a solution like the part #VGR64VR that you referenced. Or if you don't want to mess with any wiring you could…

view full answer...

Answer 4

Hey Mark, since we know your 2022 Imagine 2400BH trailer has 3,500 lb axles the correct bearing kit would be the part #TMK52VR. Bearing replacements are all based on the axle capacity of the trailer. Are you looking to have a spare set on hand or do…

view full answer...

Answer 5

The Lippert Equa-Flex #LC145546 is the closest cushioned equalizer from Lippert to fitting your Grand Design 2800BH. This particular kit is rated for 5K-8K axles. The MORryde CRE3000 #MR27ZR is going to be the best option for your camper. While this…

view full answer...

Answer 6

Hi Jonathan, that’s a great upgrade to look at, especially if you’re trying to smooth things out and take some of the harshness out of the ride. The MORryde CRE3000 part #MR27ZR could absolutely be a good fit for your 2019 Stryker 3513, but the key…

view full answer...

Answer 7

What's up, Chuck? You can definitely use higher-rated springs for your trailer, and for that I recommend checking out the 25-1/4" Long 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles #DX95CR. Be sure to change out the leaf springs on…

view full answer...

Answer 8

Hey, Joe. That's a great question. Backup cameras and rearview, observation, cameras are essentially the same, the difference comes down to how they’re wired. With a system like the Furrion Vision S+ Wireless RV Backup System #FR57AD, it’s…

view full answer...

Answer 9

I looked up the US-1067 Leaf Springs and they re 25-1/4" long so if that's what you need I recommend the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part #e93SR which are the same length, but a bit less capacity at 2,000 lbs.…

view full answer...

Answer 10

Hey Todd, thanks for the information. Since you have Dexter 4,400 lbs capacity axles you'll need the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers item #RM-2460-2560. This kit is designed to fit 3" axles and won't…

view full answer...

Answer 11

The #DM5939 is only compatible with the DA91 like the #DM8759131. Unfortunately, there is no option for manual lockout on a DA70 like the ##DM72VR. There are two ways you can keep your brakes from locking up with this brake actuator. The first is to…

view full answer...

Answer 12

Hey Jason, thanks for reaching out! Your 2022 Grand Design Transcend Xplor 265BH either has 3,500 lb axles or 4,400 lb axles. Both are listed out on the Grand Design website so you'll just need to check out the tags in the middle of your axles to…

view full answer...

Do You Have to Use the Monitor Included With the Furrion Vision S & TireMinder TPMS

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching