Looking for Replacement Bearing Kit for 2022 Imagine 2400 BH
Updated 03/14/2026 | Published 03/10/2026
Question:
Hello, I have a 2022 Imagine 2400BH with V000163950 axles. I understand that the replacement Timken bearing set would be TMK52VR. It states that it is for a 84 spindle. How do I determine that is what I have? Thank You for your assistance. Mark
asked by: Mark S
Expert Reply:
Hey Mark, since we know your 2022 Imagine 2400BH trailer has 3,500 lb axles the correct bearing kit would be the part # TMK52VR. Bearing replacements are all based on the axle capacity of the trailer. Are you looking to have a spare set on hand or do you have a damaged bearing setup currently?
Product Page this Question was Asked From
Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- Timken
more information >
Continue Researching
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: tallboy
- Search Results: moryde cre 3000
- Search Results: trailer leaf springs
- Search Results: lock nut
- Search Results: 9/16 lock nut
- Search Results: morryde trailer suspension parts
- Search Results: lock nuts
- Q&A: Replacement Bearings and Seals for 2021 Grand Design Imagine 22MLE XLS
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Q&A: Can 3500 lb Leaf Springs Be Upgraded to Heavier Duty for a 2020 Grand Design Imagine 2400BH
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4" Long
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons
- Video: Complete Breakdown of the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles
- Video: SumoSprings Trailer Helper Springs Manufacturer Demo
- Video: Let’s Check Out the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Q&A: Upgraded Equalizer and SumoSprings for 2021 Grand Design Imagine 2400BH
- Q&A: Choosing Between 4,000 and 5,000 Lb Leaf Springs to Replace 25-1/4 3,500 Lb Leaf Springs
- Q&A: Recommended 25-1/4" Long Leaf Springs
- Q&A: Recommended Upgraded Leaf Springs for a 2022 Grand Design 2400BH
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Video: Timken Bearing Kit Installation - Enclosed Trailer
Willie
3/14/2026
This camp trailer, correct? Since are likely to pull less than 6000 miles a year. I live hot southwest. Even the best grease evaporates. So need repack bearings. Every 2 years. And replace the bearings every 10 years or if worn Doing your self take about 4 hours ( homeowner speed) for 4 wheel. They ton of U tube on how to do that. Some axle grease fittings at the end of them This is great but the bearings still need to be adjusted since they do wear and become sloppy. If not adjusted can break the racers and then you’ll be buying axles and bearings and looking for a wheel and tire. Happy camping, Willie.