Replacement Hangers for 2018 Grand Design Reflection 303RLS
Published 08/01/2023
Question:
Lippert Frame model # 358881, Grand Design 303RLS 5th wheel 2018. Rear spring hangers need replacement. Do you have repalcements available? Lippert reportedly has an improved design available. Fractures have been commonplace.
asked by: Wayne C
Expert Reply:
Finding replacement hangers for your 2018 Grand Design Reflection 303RLS will require measuring your existing hangers. We have no way of looking them up and although Grand Design does a great job listing parts, they don't list the hangers.
We know that the width of your hanger is 1-3/4" since that is the standard for double-eye leaf springs. What you need to find is the height, which is the distance from center of bolt hole to top of hanger. This is listed as B in the diagram below. For example, if you found that your current hangers are 3-1/4" tall you could use the # 28-5 as a replacement.
I have attached a link below for all of our available hangers. Once you find your height you can use the filters on the left to find a replacement.
(click to enlarge)
Product Page this Question was Asked From
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 3-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Q&A: Which Hangers Should MORryde X-Factor Crossmembers Install On
- Q&A: Comparing Road Armor, Dexter E-Z Flex, and MORryder CRE-3000 Equalizers For Jayco Eagle 325BHS
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Search Results: e4139
- Shop: Fastway e2 Weight Distribution w/ Sway Control - Trunnion - 12,000 lbs GTW, 1,200 lbs TW
- Search Results: trailer suspension parts
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
- Shop: Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Video: Checking Out the Front/Center/Rear Hanger for Double-Eye Springs
- Q&A: Recommended Hangers and Shackles for Building Tandem 7,500 Pound Axle Trailer
- Search Results: lippert trailer suspension parts
- Search Results: lippert
- Video: What to Know About the Front/Center/Rear Hanger for Double-Eye Springs
- Video: Ultimate Overview of the Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs
- Video: Front/Center/Rear Hanger for Double-Eye Springs: The Breakdown
- Search Results: seals trailer bearings races seals caps
- Search Results: gs2250dl
- Search Results: rebound clips
- Q&A: Will MORryde Alltrek 4000 Have Different Trailer Ride Height than Equa Flex Equalizer
- Q&A: Want To Upgrade From CRE 3000 Suspension On 2023 Grand Design Momentum 336M
- Q&A: Will Replacing Trailer Equalizers Increase the Spacing Between Axles on a Tandem Axle Trailer
- Q&A: Troubleshooting Trailer Axle Equalizer that Touches Trailer Frame
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Wiring
on Trailer Suspension Parts
