Spare Tire Carrier Compatible With 24x60 etrailer Cargo Carrier # e99049

Question

Question:

I have mounted the 24x60 cargo carrier on my travel trailer. Is there a spare tire mount that would attach to the underside of the carrier so I can fold the carrier up when Im not using it? Thank you

asked by: John B

1

Helpful Expert Reply:

While there is not a specific mount for carrying as spare tire on a 24x60 etrailer Cargo Carrier # e99049 I have seen several use a U-Bolt Mount # CE22007Z-11050-2 to mount around the base of the tray rack to secure the tire under the carrier.

expert reply by: Bud M

1

Answer 1

I do have an option for you but there isn't a spare tire holder designed to be used with the 24x60 etrailer Cargo Carrier for RV Bumper part #e99049. That said, you might be able to use something like the CE Smith Spare Tire Carrier for Trailers…

view full answer...

Answer 2

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

view full answer...

Answer 3

I would be happy to help! The only difference between the Mount-n-Lock Safety Struts #MO34VR and #MO22FR you were looking at is the hardware used to attach them. The #MO34VR uses nuts and bolts where the #MO22FR uses self tapping screws. Since both…

view full answer...

Answer 4

We have the 24x84 etrailer Cargo Carrier for RV Bumper, #e96ZR. From available online specs, the exterior width of the Wolf Pup is listed at 85". We also have the 64" #e83YR, a 60" wide version under part, #e99049 and a 40"…

view full answer...

Answer 5

The bracket spacing on the 24x60 etrailer Cargo Carrier for RV Bumper #e99049 is 27-1/2". Attached is a quick diagram for you to check out as well.

view full answer...

Answer 6

The Mount-n-Lock SafetyStruts Universal Kit #MO34VR includes the Standoff Spacers #MO54VR along with drill bits and the components found in the Standard Kit #MO22FR. The standoff spacers allow for mounting on I-beams shorter than 6".

view full answer...

Answer 7

The 24x60 etrailer Cargo Carrier for RV Bumper #e99049 and larger 24x84, #e96ZR does not come with a spare tire mounting feature/option. However, if you have enough space on the bumper, you can add a bumper-mounted spare tire carrier next to the…

view full answer...

Answer 8

It's possible to use two sets of the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets part #MO22FR but you might need to alter the hardware or instructions slightly. That said, it's not needed nor would it produce a higher…

view full answer...

Answer 9

The Safety Struts you have now on your RV frame/bumper would work well with the 24x60 etrailer Cargo Carrier for RV Bumper #e99049 that you mentioned. You can use them instead of the brackets that come with the carrier and you'd be perfectly…

view full answer...

Answer 10

Neither the 24x64 etrailer Cargo Carrier for RV Bumper #e83YR nor the 24x60 etrailer Cargo Carrier for RV Bumper #e99049 come with a spare tire bracket. If you were trying have both the carrier and a bumper mounted spare tire carrier, like #TR-2,…

view full answer...

Answer 11

I recommend using either a 24x40 etrailer Cargo Carrier for RV Bumper #e99050 or 24x60 etrailer Cargo Carrier for RV Bumper #e99049 and moving the spare tire to either side of the bumper. You can see how the 40" wide carrier is installed with a…

view full answer...

Answer 12

The carrier in your picture looks like it's welded to the rear bumper so the closest option we would have would be the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR that you were looking at. This carrier comes with brackets that can fit…

view full answer...

Spare Tire Carrier Compatible With 24x60 etrailer Cargo Carrier # e99049

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching