Using a etrailer Cargo Carrier On Travel Trailer With Spare Tire Mounted On The Center Of The Bumper

Question

Question:

What would be the best set up with spare tire holder in the middle of bumper? I have a spare tire mounted on bumper in the middle, could I use the 24 on either side?

asked by: Kenneth M

0

Expert Reply:

I recommend using either a 24x40 etrailer Cargo Carrier for RV Bumper # e99050 or 24x60 etrailer Cargo Carrier for RV Bumper # e99049 and moving the spare tire to either side of the bumper. You can see how the 40" wide carrier is installed with a spare tire on a travel trailer linked in the installation video below.

You will not want to use the 24" Extension # e99052 on either side as it only has one mounting point and no side rails to hold the cargo in place.

expert reply by: Bud M

0

Answer 1

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

view full answer...

Answer 2

The carrier in your picture looks like it's welded to the rear bumper so the closest option we would have would be the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR that you were looking at. This carrier comes with brackets that can fit…

view full answer...

Answer 3

The Safety Struts you have now on your RV frame/bumper would work well with the 24x60 etrailer Cargo Carrier for RV Bumper #e99049 that you mentioned. You can use them instead of the brackets that come with the carrier and you'd be perfectly…

view full answer...

Answer 4

It's possible to use two sets of the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets part #MO22FR but you might need to alter the hardware or instructions slightly. That said, it's not needed nor would it produce a higher…

view full answer...

Answer 5

I do have an option for you but there isn't a spare tire holder designed to be used with the 24x60 etrailer Cargo Carrier for RV Bumper part #e99049. That said, you might be able to use something like the CE Smith Spare Tire Carrier for Trailers…

view full answer...

Answer 6

The Mount-n-Lock SafetyStruts Universal Kit #MO34VR includes the Standoff Spacers #MO54VR along with drill bits and the components found in the Standard Kit #MO22FR. The standoff spacers allow for mounting on I-beams shorter than 6".

view full answer...

Answer 7

While there is not a specific mount for carrying as spare tire on a 24x60 etrailer Cargo Carrier #e99049 I have seen several use a U-Bolt Mount #CE22007Z-11050-2 to mount around the base of the tray rack to secure the tire under the carrier.

view full answer...

Answer 8

Yes, you can absolutely get the support brackets from the etrailer cargo carriers for RV Bumpers #e99049 separately. The correct part number for those support brackets are the following: - Mount-n-Lock SafetyStruts Universal RV Bumper Support…

view full answer...

Answer 9

The 24x60 etrailer Cargo Carrier for RV Bumper #e99049 and larger 24x84, #e96ZR does not come with a spare tire mounting feature/option. However, if you have enough space on the bumper, you can add a bumper-mounted spare tire carrier next to the…

view full answer...

Answer 10

Neither the 24x64 etrailer Cargo Carrier for RV Bumper #e83YR nor the 24x60 etrailer Cargo Carrier for RV Bumper #e99049 come with a spare tire bracket. If you were trying have both the carrier and a bumper mounted spare tire carrier, like #TR-2,…

view full answer...

Answer 11

We have the 24x84 etrailer Cargo Carrier for RV Bumper, #e96ZR. From available online specs, the exterior width of the Wolf Pup is listed at 85". We also have the 64" #e83YR, a 60" wide version under part, #e99049 and a 40"…

view full answer...