Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Carry generators, coolers, and other bulky gear behind your RV with this bumper-mounted cargo carrier. You don't need a hitch to install it, you can expand it to carry more gear, and you can fold up if you need a little extra space for parking.
Features:
Specs:
Notes:
No matter how big your RV is you'll likely have gear you'd prefer not to store inside. This carrier lets you transport generators and fuel cans, so your storage compartments don't smell like gas. You can also strap coolers, luggage, and other bulky objects on it to free up space inside your RV. Lastly, it's great for carrying wet, dirty, or smelly items outside of the RV, keeping your interior clean and odor free. It has raised side rails that help prevent your gear from sliding off and provide multiple anchor points for a cargo net, bungee straps, or other tie-downs (sold separately).
Most RVs don't have hitches installed, so if you want to use a cargo carrier, you'd have to install a hitch receiver. However, this cargo carrier mounts on your RV's bumper, so you don't need a hitch to carry your gear. It's also designed to provide better load distribution across your bumper than a hitch-mounted carrier.
When the carrier is not being used, you can fold it up against the back of your RV. This is convenient if you need a little extra space at the campsite, if you're travelling but not carrying any gear at the time, or if you're parking close to a fence, a shed, or a garage. To fold the basket up, just remove the snapper pin from each arm assembly, fold the rack up toward your vehicle, then reinsert the pins through the holes in the top of the mounting brackets.
The carrier is easy to install. Just slide the mounting brackets over your RV's bumper, spacing them 17-5/8" apart (inside edge to inside edge), and secure them with the included M10 hex bolts. Attach the main arm assemblies to the mounting brackets with the included M16 hex bolts. Attach the basket to the main arm assemblies with the included M8 carriage bolts. The included support brackets mount to most RV frames to reinforce your bumper and prevent metal fatigue that can cause your bumper to detach.
If you outgrow the carrier later on, you can add an extension to increase its width. A 24" extension will make the carrier 84" wide. To install the extension, place the mounting brackets an additional 24" apart on the bumper, unbolt the junction between the left and right side of the basket, and bolt the extension between them.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
James D.
5/27/2026
Thanks for the feedback Peter, These cargo carriers provide tons of value by freeing up that truck bed, glad you had a a great experience and appreciate you choosing etrailer!
Douglas
6/11/2026
Love it, Use it for each RV trip. Found a large Bin that fits nicely
Lazer S.
6/11/2026
Claire H.
9/29/2026
When you say it didn't meet the standard of being level do you mean that it was sagging? If you have any photos so we can see what was going on that would be very helpful.
Chris
8/9/2023
So far so good! Paints holding up! Racks holding up! After a year of use would definitely buy again or recommend! Directions on support brackets are horrible! Had to buy all new hardwood to make support brackets actually work and work well! Extra $4!
Dave
7/26/2021
Our bumper got twisted. I Moved the brackets out and added an additional bracket in the middle. Not the fault of the carrier. A little heavier bumper would not have twisted. Not big damage, everything still works.
David
9/5/2023
GREAT! Do have to be mindful of big dips in and out of some campsites when the carrier is down.
Mike L.
10/26/2023
Jenny N.
1/13/2024
It does sound like the package went through a rough trip. I do know that you do need the bumper reinforcing kit and I will pass along the feedback regarding the instructions.
Jenny N.
11/30/2022
. I would love to tell you that carrying the spare tire that way is safe to do, however I cannot. I am concerned that the heavy-duty zip ties might not hold up or hold up over time. I recommend moving it underneath as you had mentioned. We do have a spare tire winch that you can take a look at. It is part # LC159056. With it, it is recommended to also have part # 165649, part # LC1315411 and part # LC119226. The rack looks great installed!
James L.
9/9/2023
I carry my generator, spare tire and firewood on it every time that I go camping.
Mike L.
11/2/2023
David
7/17/2025
I did fabricate a combo support bracketspare tire carrier that slides in the receiver. Works great.
Lazer S.
7/17/2025
David B.
1/27/2022
Just the way we hoped it would, easy to take up and down, well built and no issues. Would buy again if I needed one! Thank for a GREAT product
Do you have a question about this RV Cargo Carrier?
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches and gouges. Otherwise has not been used, everything is present and is still in good condition for its application.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
8/12/2026
Glad the carrier is working well for you! What else have you carried in it?