Correct Replacement Landing Gear Motor for an Older Atwood 71119

Question

Question:

Hi. I’m looking for replacement gear box motor for Atwood Mobile MPD 71119 75721 motor gearbox

asked by: Heather O

0

Expert Reply:

The correct replacement motor for your older Atwood landing gear motor 71119 is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893.

expert reply by: Bryce D

0

Answer 1

To test your Control Module #LC379605 you'll need a 12v battery and an extra wire harness #LC369243 to connect the control module to the battery. You'll unplug the connector from the wire harness running to your motorhome's wiring and…

view full answer...

Answer 2

The correct step control for you is the Lippert Components Kwikee Step Control with Override and PKD part #LC379605 based on the part number you mentioned and the picture you mentioned.

view full answer...

Answer 3

You are correct that Atwood was bought out by Lippert, and replacement parts are difficult to come by these days. I spoke to my contact at Lippert and your Atwood 66280 Level Leg system does not have any replacement parts available, so the…

view full answer...

Answer 4

I reached out to my contact at Lippert and since your landing gear motor is blowing a fuse as soon as it sees load he mentioned the issue is more than likely that the motor is not getting the correct voltage, with the less common cause being the…

view full answer...

Answer 5

Yes, the Lippert Components Heavy Duty Landing Gear Motor part #LC196308 would be a more dependable option than the Lippert Components High Speed Landing Gear Motor part #LC141893 that you have now. This motor has a higher weight capacity (6,500 lbs…

view full answer...

Answer 6

The correct replacement motor for your older Atwood landing gear motor 71119 is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893. This isn't a listed fit but we have heard that others have made this work for your…

view full answer...

Answer 7

The picture you submitted shows the motor (MPD 71119 ) for a standard Atwood landing gear jack set like the Stromberg Carlson kit part #LG-1. If you are wanting a direct replacement you would want the part #LG-1 as Atwood is no longer in business and…

view full answer...

Answer 8

The correct replacement motor you'd need is the part #LC141893 if you do determine that the motor is at fault. If the battery on the trailer is in good working order and all of the wiring is clean and tight it would have to be the motor. You…

view full answer...

Answer 9

Per conversation with Lippert, the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893 is a compatible replacement for the 1-065-041012-01 electric motor you listed.

view full answer...

Answer 10

We do have the correct replacement for your Atwood 71119 landing gear motor, which is what is shown in your photo. The replacement part is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893. I have added a link to a…

view full answer...

Answer 11

We've checked in the past and have been told the only current landing gear motor that can be used with your Atwood setup is the part #LG-142178 which even having a lower capacity will still do a great job. The jack motor doesn't support the…

view full answer...

Answer 12

Thank you for the pictures and information provided. While the Atwood 75721 motor and gear boxes are discontinued, we do have a gear box that will work with your Atwood 75721 motor and landing gear. - Replacement Gearbox for Venture Aluminum Electric…

view full answer...

Correct Replacement Landing Gear Motor for an Older Atwood 71119

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching