Replacement Motor Solution for Atwood MPD 71119 Landing Gear

Question

Question:

I need to replace Atwood MPD 71119 landing gear motor will the LG-14278 work or is there another one to replace it with??

asked by: Sheila

0

Expert Reply:

The correct replacement motor for your older Atwood landing gear motor 71119 is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893. This isn't a listed fit but we have heard that others have made this work for your application since Atwood is no longer in RV business. You may need to trim down the legs of the motor.

expert reply by: Jameson C

0

Answer 1

While there isn't a specific weight capacity for the Brophy Clamp On Camper Tie-Downs #HSAB there is a 3,000lb capacity for the turnbuckles #TDHP that go along with these tie-downs. To ensure fitment of these tie-downs your truck will need to…

view full answer...

Answer 2

Hey Ernie, I know you were asking for Evangeline but she's out doing a video install right now and asked me to help out. Which I can do as we can get your 2019 Ram 2500 set up with camper tie-downs for your Palomino camper, and there is an option…

view full answer...

Answer 3

We do have the correct replacement for your Atwood 71119 landing gear motor, which is what is shown in your photo. The replacement part is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893. I have added a link to a…

view full answer...

Answer 4

The correct replacement motor you'd need is the part #LC141893 if you do determine that the motor is at fault. If the battery on the trailer is in good working order and all of the wiring is clean and tight it would have to be the motor. You…

view full answer...

Answer 5

We've checked in the past and have been told the only current landing gear motor that can be used with your Atwood setup is the part #LG-142178 which even having a lower capacity will still do a great job. The jack motor doesn't support the…

view full answer...

Answer 6

The correct replacement motor for your older Atwood landing gear motor 71119 is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893.

view full answer...

Answer 7

Yes, the Lippert Components Heavy Duty Landing Gear Motor part #LC196308 would be a more dependable option than the Lippert Components High Speed Landing Gear Motor part #LC141893 that you have now. This motor has a higher weight capacity (6,500 lbs…

view full answer...

Answer 8

The picture you submitted shows the motor (MPD 71119 ) for a standard Atwood landing gear jack set like the Stromberg Carlson kit part #LG-1. If you are wanting a direct replacement you would want the part #LG-1 as Atwood is no longer in business and…

view full answer...

Answer 9

Per conversation with Lippert, the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893 is a compatible replacement for the 1-065-041012-01 electric motor you listed.

view full answer...

Answer 10

I reached out to my contact at Lippert and since your landing gear motor is blowing a fuse as soon as it sees load he mentioned the issue is more than likely that the motor is not getting the correct voltage, with the less common cause being the…

view full answer...

Answer 11

Thank you for the pictures and information provided. While the Atwood 75721 motor and gear boxes are discontinued, we do have a gear box that will work with your Atwood 75721 motor and landing gear. - Replacement Gearbox for Venture Aluminum Electric…

view full answer...

Answer 12

Hello Chase, thanks for reaching out. We very well may have a replacement motor and circuit board for your bathroom exhaust fan, but without knowing what camper you have and what model vent you have there is no way for me to accurately recommend…

view full answer...

Replacement Motor Solution for Atwood MPD 71119 Landing Gear

Product Page this Question was Asked From

Continue Researching