Availability Of a Roller For Roof Rack With a 34" Long Length

Question

Question:

Can these roller bars but cut/shortened to fit specific application? I need 2 @ 34 inches. Thanks!

asked by: Jeff P

0

Expert Reply:

I have a couple options for you as Thule says you are not able to modify their Roof Rack Roller # TH99PF to make it fit a shorter length. They do offer their 25-9/16" Roller # TH39PF which is quite a bit smaller or you can possibly use the Rhino-Rack # RR1500. This has a vinyl tube which rolls on an aluminum shaft and would be able to be cut down. As the tube is vinyl there is a chance of the tube cracking but you should be okay if you use a fine tooth saw blade designed for vinyl to cut this particular part.

expert reply by: Bud M

0

Answer 1

Hey Dennis! We don't currently offer a roof rack roller that's around 40" long, but we do have a few options that may work for your setup. The best option depends on the crossbar system that you currently have on your truck, but you can…

view full answer...

Answer 2

When the MaxxAir MaxxFan Deluxe #MA00-05301K is in the open position it sits above the roof 9-5/16" but when it is in the closed position it sits above the roof only 5". If you check out the linked review video our team member mentions this…

view full answer...

Answer 3

Hey David, it looks like all you need is the ARB Universal Awning Bracket #ARB57FR.

view full answer...

Answer 4

I spoke to my contact at Rhino Rack and he informed me that the length of the roller on the Rhino Rack Ladder Roller #RR1500 that you referenced is 56-1/4 inches. Check out the picture I attached to see this measurement.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Availability Of a Roller For Roof Rack With a 34" Long Length

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching