Parts Needed to Mount ARB 2.5m Awning to Yakima Jetstream Crossbars

Question

Question:

What hardware is needed to mount ARB 2.5m awning to Yakima Jetstream crossbars? Thank you

asked by: David D

0

Expert Reply:

Hey David, it looks like all you need is the ARB Universal Awning Bracket # ARB57FR.

expert reply by: Bryce D

0

Jesse M.

12/22/2025

Hey David, how did the ARB Universal Awning Bracket work with your Yakima Jetstream crossbars? Your update could make it easier for the next person setting up the same awning.

Answer 1

When the MaxxAir MaxxFan Deluxe #MA00-05301K is in the open position it sits above the roof 9-5/16" but when it is in the closed position it sits above the roof only 5". If you check out the linked review video our team member mentions this…

view full answer...

Answer 2

I have a couple options for you as Thule says you are not able to modify their Roof Rack Roller #TH99PF to make it fit a shorter length. They do offer their 25-9/16" Roller #TH39PF which is quite a bit smaller or you can possibly use the…

view full answer...

Answer 3

The Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 #Y8880184 will fit in the channels of your HD bars, but for the most part, crossbar mounted accessories will come with (or have available) T-channel hardware that will…

view full answer...

Answer 4

Hey Heather, The head of the Replacement M8 x 16 mm Square Head Bolt for Rhino-Rack Accessories #RR93XB is 20mm x 20mm so it should be exactly what you need.

view full answer...

Answer 5

I have an answer for you. Unfortunately, the Batwing and Foxwing Hardware Kit for Rhino-Rack Heavy-Duty Crossbars #RR33101 is customized to fit the Rhino-Rack Batwing Awnings as well as the Rhino-Rack Foxwing Awnings. The bolts specially fit the…

view full answer...

Answer 6

The three holes on the back of the Rhino-Rack Sunseeker and Batwing Awning Mounting Bracket for Pioneer Platform Rack #RR43259 are spaced 1" on center.

view full answer...

Answer 7

I can't post that picture because it's from another website but the distance between the top hole and the center hole of the ARB Universal Awning Bracket item #ARB57FR is 2". This is a center to center measurement. These holes are oblong…

view full answer...

Answer 8

Hey Dave, Thanks for the photo, and while I can't post it I can tell you exactly what was used there for the mounting on the crossbars, and that was the Universal MightyMounts for Yakima Roof Mounted Accessories #Y03590. Just keep in mind the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Parts Needed to Mount ARB 2.5m Awning to Yakima Jetstream Crossbars

Product Page this Question was Asked From

Continue Researching