How Long is the Roller on the Rhino Rack Roller part # RR1500

Question

Question:

what is the over all length of the roller for rhino rack heavy duty cross bars 59foot long

asked by: Kelly E

0

Expert Reply:

I spoke to my contact at Rhino Rack and he informed me that the length of the roller on the Rhino Rack Ladder Roller # RR1500 that you referenced is 56-1/4 inches.

Check out the picture I attached to see this measurement.

expert reply by: Jameson C

0

click to enlarge

Bret D.

9/17/2024

Jameson, can you tell me what the diameter of this roller (OD) Thank you

Jameson C.

9/17/2024

@BretD We can't get that info because it looks like Rhino Rack discontinued it and isn't supporting any longer and we don't have any in stock we can measure.

Answer 1

Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers #Y52AV and the HD Bar SL Adapters #Y03541 to mount the Yakima HD bars such as the #Y01158…

view full answer...

Answer 2

If the square bars were the Rhino Rack HD crossbars that have channels that along the top of them yes the Ladder Roller for Rhino-Rack Heavy-Duty Crossbars #RR1500 would work. If they are standard square bars like from Thule it would not work.

view full answer...

Answer 3

Hey Brian, thanks for reaching out. I went out to our warehouse and measured one of the etrailer Sidewind Aluminum Jacks #e95YV. The distance from the center of the bracket to the bottom of the wheel is approximately 14" with the jack fully…

view full answer...

Answer 4

Hey David, thanks for reaching out. Yes, we do have a bracket that can be used to mount recovery boards on a roof rack with T-slots. Take a look at the following: - Stow It Recovery Track Holder for Rhino-Rack Pioneer Platform, Reconn-Deck, and…

view full answer...

Answer 5

The way the Ladder Roller for Rhino-Rack Heavy-Duty Crossbars #RR1500 works is that the top bracket mounts into the t-tracks of your bars and roller is on the side. That means they can't be flipped upwards since there are no t-tracks on the side…

view full answer...

Answer 6

Hi, Aaron. Yes, the LockRack Ladder Rack Base Set with Upright, part #LR96FR, is compatible with the Rhino Rack Sportz roof rack, including the Sportz crossbars in part #RR43HG for the 2024 GMC Sierra 2500 crew cab or double cab with a naked roof.…

view full answer...

Answer 7

There are ways you can carry 138 pounds worth of kayak with your 2017 Ford F-150 but I need a little more information. Are you wanting to carry them on the roof, above the bed, in the bed, somewhere else? Will you also be towing a trailer at the same…

view full answer...

Answer 8

We do have a single crossbar setup that you can add to your 2020 Ford F-150 and it comes from Rhino-Rack with the following parts: 59" Vortex Crossbar - Silver #RRVA150S or Black #RRVA150B 2500 Series Legs - #RRRLKVAH Fit Kit - #DK427H This…

view full answer...

Answer 9

We have other options for carrying a kayak, but the Hullavator #TH711420 will not work with your truck due to the lack of overhang of your bars over your feet with the Adarac Ladder Rack #A4001665. If you're looking to load up your kayaks easily,…

view full answer...

Answer 10

We have what you need, but the Ladder Roller for Rhino-Rack Heavy-Duty Crossbars #RR1500 will not fit your Yakima HD bars; it is only a fit for Rhino-Rack HD crossbars. Instead, the correct roller for your Yakima HD bars is the Ladder Roller for…

view full answer...

Answer 11

I have a couple options for you as Thule says you are not able to modify their Roof Rack Roller #TH99PF to make it fit a shorter length. They do offer their 25-9/16" Roller #TH39PF which is quite a bit smaller or you can possibly use the…

view full answer...

How Long is the Roller on the Rhino Rack Roller part # RR1500

Product Page this Question was Asked From

Continue Researching