Will Malone LowBed MicroSport Trailer for 2 Heavy Kayaks Work with Old Town Sportsman 106's

Question

Question:

Can this trailer hold 2 Oldtown Sportsman 106 w/ minikota

asked by: Todd

1

Helpful Expert Reply:

The Malone LowBed MicroSport Trailer for 2 Heavy Kayaks part # MAL25FR should work well for your two Old Town Sportsman 106 Kayaks. They both fall under the weight (225 lbs per boat) and length (20' per boat) requirements so you won't have any issues.

expert reply by: Conner L

1

Answer 1

Hey Barry, yes the lowbed coversion kit part #MAL33TR and the retractable tongue kit part #MPG494 are both a fit for the Malone Microsport Trailer part #MPG460G. What are you planning on using the Microsport for?

view full answer...

Answer 2

Yes, you can Chris. Both the Retractable Tongue Kit item #MPG494 and the Trailer Tongue Kickstand item #MPG467 are compatible with Malone MicroSport Trailers like the item #MAL97ER. The Malone MicroSport Trailers item #MAL97ER has a 2" coupler…

view full answer...

Answer 3

Hello John, Wow, that is a really nice fishing kayak! What is the biggest fish you have caught? We have a great trailer that will work for transporting your kayak, but it will require some assembly. The Malone EcoLight Sport Trailer for a Heavy Kayak…

view full answer...

Answer 4

The Malone LowBed MicroSport Trailer #MAL25FR and Malone MicroSport Trailer #MPG461B2 are very similar as they are both built on the same platform. This allows them to both carry the same weight and size kayaks. The #MPG461B2 has a 30" height to…

view full answer...

Answer 5

Hey Russ, The only difference between the LowBed MicroSport #MAL25FR and MicroSportXT #MPG460XT is the load bar support beams. The beams are longer for the XT giving it a taller height, whereas the low bed has shorter supports. You'd be able to…

view full answer...

Answer 6

The retractable tongue kit part #MPG494 that you referenced works perfectly fine with the Malone Microsport Lowbed part #MAL25FR that you also referenced.

view full answer...

Answer 7

We can piece together a Malone Lowbed trailer by first starting with the part #MPG464-LB and then a single bunk kit part #MPG561 and then the spare kit part #MPG465 and you'd be set. There isn't a kit with just the parts you are looking for…

view full answer...

Answer 8

Hello Joe, thanks for reaching out. That is going to be really tight since the crossbars on the Malone EcoLight Sport Trailer #MAL43FR are only 58" long. Even with the support brackets positioned as far outboard as possible, I do not see two…

view full answer...

Answer 9

Hey Dan, yes the difference between the two Rhino Rack roof rack part numbers is the length of the bolts. The part #Y02-480B has bolts that are 1-3/8 inches whereas the part #Y02-480B-ST has 2 inch long bolts. It really comes down to how thick the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Will Malone LowBed MicroSport Trailer for 2 Heavy Kayaks Work with Old Town Sportsman 106's

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching