Correct Spacers for Timbrens for 2008 Toyota 4Runner

Question

Question:

Do these spacers work with/fit the Timbren SES torseq model for a 2008 Toyota 4Runner?

asked by: Derek

0

Expert Reply:

The correct spacers for the Timbren Rear Suspension Enhancement System part # TTORSEQ which is a fit for a 2008 Toyota 4Runner is the Timbren Spacer for Raised Frame Vehicles part # TA25722-90P00 for 1/2" or part # TA25722-90F00 for 1". Please note, you will need some longer bolts to attach the spacers to the brackets but you can get these from a local hardware store.

expert reply by: Conner L

0

Answer 1

When it comes to installing a rear suspension enhancement system on your 2022 Toyota 4Runner I recommend The Timbren Rear Suspension Enhancement System #TTORSEQ. This system has a 6,000 pound capacity, which improves the suspension, handling and…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 8

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Correct Spacers for Timbrens for 2008 Toyota 4Runner

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching