Replacement Torque Allen Key For Rhino-Rack 2500 Series Legs

Question

Question:

I bought the Rhino Rack 2500 series, I wanted to get another rack tool, or the only tool it really came with to tighten the racks down. Thank you.

asked by: Matthew D

0

Expert Reply:

We do have the replacement torque Allen key for the Rhino-Rack 2500 Series Legs # RRRLKVA. The correct part for that is the following:

- Replacement Rhino Rack Security Allen Key - Long # SECKEY-L

expert reply by: Kyle S

0

Answer 1

Based on the info in our system, it looks like you are looking for the wrench to go with the Rhino-Rack 2500 system. For this system, you will want the Replacement Rhino Rack Security Allen Key - Long #SECKEY-L.

view full answer...

Answer 2

It sounds like you are looking for either the standard length replacement Rhino-Rack security key, #SECKEY-S, or the long version, #SECKEY-L. Either one will work despite the difference in handle color.

view full answer...

Answer 3

Hi Eric; thanks for the question and the answer is no, hardware is not included with the Replacement Leg for Rhino-Rack SG Roof Racks for Rain Gutters #RR83FY. This is a direct replacement for the #RRSG59 and #RRSG60 roof racks, so you would ideally…

view full answer...

Answer 4

Don't worry...I've got you covered. Your picture was a great help and I was able to pull up your order to confirm. You have a Rhino Rack Vortex, consisting of Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long - Qty 2,…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Replacement Torque Allen Key For Rhino-Rack 2500 Series Legs

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching