Will Yakima Mighty Mount 23H Accessory Adapter Fit Factory Crossbars on a 2022 Toyota Sienna

Question

Question:

I have a Toyota Sienna 2022 with factory roof racks. Would like to install the Yakima MightyMount 23H adapter to fit a tandem bike carrier we have. Approximate dimensions of the roof rack cross bar is 2.6 inch wide x 0.8 inch thick. Do you think this would work?

asked by: Charles L

0

Expert Reply:

Yes, the Yakima Mighty Mount 23H Accessory Adapter # Y03523 will work great for the factory crossbars on your 2022 Toyota Sienna.

expert reply by: Jon G

0

Answer 1

The Mighty Mount 39H #Y03539 and 23H #Y03523 Accessory Adapters are pretty much the same thing and will be compatible with 3-1/8" wide x 1" tall crossbars. The biggest difference between these adapters is that the 39H is designed…

view full answer...

Answer 2

The Yakima Universal MightyMounts #Y03590 will fit the factory crossbars on your 2016 Toyota RAV4. I've attached a photo of the MightyMounts installed on a customer's 2018 RAV4 with factory roof rack to demonstrate. While the MightyMounts…

view full answer...

Answer 3

The Mighty Mount 39H Accessory Adapter #Y03539 will fit the OEM aero-style crossbars on your 2022 Tesla Model 3 but for a better fit I recommend using the 23H Adapters #Y03523 instead. These are essentially the same thing but they also come with…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Hey, Wilson! Thanks for your question. Yes, the Curt custom hitch part #C64DR will fit your 2026 Toyota Corolla Cross hybrid model. Even though it is a custom hitch, you will have to temporarily remove the bumper/fascia to complete the installation.…

view full answer...

Answer 9

Hi Bernadette! I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 2" #C64DR for your 2026 Toyota Corolla Cross Hybrid SE AWD. It's American made and can handle up to 200 pounds of tongue weight and 2,000 pounds of towing…

view full answer...

Answer 10

Hey Curt, we have a 2 inch hitch that fits your 2026 Toyota Corolla Cross non-hybrid with the part #C64DR but we don't have any EcoHitch fits at this time for the non-hybrid models. Are you planning on doing some towing?

view full answer...

Answer 11

Hey M, all of our hitches have a weight capacity that is determined independently from the vehicle it is designed to fit including the Draw Tite part #DT28GR that you referenced. This hitch was designed to fit the vehicle and then made as strong as…

view full answer...

Answer 12

Thanks for reaching out Lee. I'd recommend the Curt Trailer Hitch Receiver #C64DR for your 2025 Toyota Corolla Cross Hybrid. This hitch features a 2-inch receiver and is rated for 2,000 lbs of gross trailer weight and 200 lbs of tongue weight.…

view full answer...

Will Yakima Mighty Mount 23H Accessory Adapter Fit Factory Crossbars on a 2022 Toyota Sienna

Product Page this Question was Asked From

Continue Researching