How can I Determine Which Size Spring Bars I Need for My Equal-i-Zer WDS?

Updated 05/01/2023 | Published 04/28/2023

Products Featured in This Question

Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,000 lbs TW

(34)

$187.51

Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 400 lbs TW

(4)

$158.77

Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 600 lbs TW

(13)

$184.84

Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,400 lbs TW

(26)

$252.47

Question:

How do I know what spring tension is my bar is ? 400 or 600 lb ? Is it stamped on the bar? My are painted over so can’t read it.

asked by: Ed

Expert Reply:

It is not going to be stamped on the bars, unfortunately, The easiest way to determine which spring bars you have is to measure the inside hole on the head where the spring bars would go.

If you measured 1", then the correct bars you'd need are the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-0499;

If you measured 1-1/4", then the correct bars you'd need are the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-0699;

If your measurement is 1-3/8", then the bars you'd need are the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-1099;

If the measurement is 1-1/2", then the bars you'd need are the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-1499.