Availability of Trailer Hub that Fits Spindle with Bearing Diameters of .75 and 1.25 inch  

The hub face of the #AH15450ECOMP Agricultural Hub is 6-1/4 inches in diameter, and the overall depth is 4 inches. The hub has an inner hub bore diameter of 2.328 inches with an outer bore diameter of 1.781 inches. I've shown these dimensions in…

The only hub we carry that will fit your spindle size is the Agricultural Hub #AH15450ECOMP, as most have changed over to the more common BT8 #TRU59FR and BTR #TRU44FR. The agricultural hub is only rated for speeds up to 20mph and uses a 4 on 5"…

Thickness is not usually a dimension associated with picking out a replacement seal. Typically it's the outer diameter and the bearing used with it that is used for picking out a replacement seal. With that being said, you wouldn't want to…

From the measurements you gave me, it sounds like you have an Agricultural Spindle like #TRU54FR that uses #LM67048 Inner bearing and #LM11949 Outer bearing. For a hub assembly with a 4 on 5 bolt pattern #AH15450ECOMP will work and the bearings, seal…

Yes you can add brakes to trailer axles that have a drop built into them like the Dexter #8327812 which has a 4 inch drop as the axle has mounting flanges for brake assemblies built in to it. You'd want the Dexter brake assembly set part…

The only trailer hub assembly we offer with a .750" (part #LM11949) inner bearing and a 1.250" (part #LM67048) outer bearing is the Trailer Hub Assembly part #AH15450ECOMP which uses a 4 on 5" bolt pattern. This is a very odd bearing…

The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has #L44649 inner and outer…

The thickness of the Redline Grease Seal #168233 seal is 0.38. However, thickness is not always a dimension associated with picking out a suitable replacement seal. Typically it is the outer diameter and the inner bearing for picking out a…

I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…

It sounds like your trailer uses agricultural hubs #AH15450ECOMP. This hub has the same 1.25 and 0.75 inner and outer bearings which are parts #LM67048 and #LM11949. Make sure your seals have an outer diameter of 2.332 inches and inner diameter of…

There is very little difference between the two. Both hub/drums are for a 7K axle, and have an 8 on 6-1/2 inch bolt pattern with 1/2 inch wheel studs. Either hub/drum includes the bearings, races, grease seal, lug nuts and E-Z Lube dust cap. The…

Looks like you found the chart that Jeff D made that shows common axle capacities based on diameter: Typical Axle Diameters Based on Axle Capacity - 1,000-lb - 2,000-lb Axles: 1-1/2 inch - 1-3/4 inch diameter - 3,500-lb Axles: 2-3/8 inch diameter -…